Trailer Wiring Harness Installation - 2017 Nissan Rogue Video

The Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector #C56397 that fits your 2017 Nissan Rogue Sport will hang out of the rear hatch of your vehicle as you mentioned was the case on your BMW X3. I have added photo which shows…

The hitch fits are different between the Sport model 2019 Nissan Rogues and the non-Sport models. So what you'd need is the part #76177 for a Class III 2-inch hitch that fits your 2019 Sport model. This has a concealed crosstube which allows it…

The Sport versions of the 2018 Nissan Rogue actually require a different hitch fit. Instead you'd need the part #76177 which does accommodate the frame differences you mentioned.

In order to pick out the correct rise/drop ball mount you need to take a couple measurements and do one simple calculation. It sounds like you may need a different drop ball mount, but to prevent you from ordering the wrong one check out the FAQ…

The jacketed circuit is the ground. The one right next to that one is the tail light circuit, next to that one is the left turn circuit. And then the last one on the end is the right turn circuit. Check out the picture I attached to see the circuits…

The trailer hitch I recommend for your 2019 Nissan Rogue SV is the etrailer hitch part #E98846 because it has the matte finish you want, it has plenty of towing capacity at 3,500 lbs, and it has a concealed crosstube which makes it a bit less…

The plastic parts are just "appearance" panels, and won't be re-installed after putting the etrailer.com Trailer Hitch #E98846 on your 2017 Nissan Rogue. These panels do not serve any specific function for your Rogue and as such can be…

For your 2017 Nissan Rogue, I recommend the Draw-Tite Class III Max Frame Receiver Hitch #75902. This is a Class III trailer hitch that has a 3,500 pound towing capacity and 350 pound tongue weight capacity, although I also recommend checking your…

The etrailer.com Trailer Hitch Receiver #E98846 that fits your 2017 Nissan Rogue uses M12-1.25 x 35mm hex bolts, which are included with the hitch. I have added a link to a video showing this hitch being installed on a '17 Rogue as well as a link…

If you have the 2017 Nissan Rogue the trailer hitch I recommend is the Draw-Tite #75902. This is a Class lll hitch and it has a 2-inch receiver opening. This is a custom fit hitch and requires no drilling for installation. If you have the Rogue…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…