etrailer.com Trailer Hitch Installation - 2017 Nissan Rogue Video

The hands free liftgate sensor for your 2019 Nissan Rogue will still be operational with the installation of an aftermarket trailer hitch. However, you will need to place your foot on either side of the receiver tube opening in order to activate it.…

The etrailer.com Trailer Hitch Receiver #E98846 that fits your 2017 Nissan Rogue uses M12-1.25 x 35mm hex bolts, which are included with the hitch. I have added a link to a video showing this hitch being installed on a '17 Rogue as well as a link…

For your 2017 Nissan Rogue, I recommend the Draw-Tite Class III Max Frame Receiver Hitch #75902. This is a Class III trailer hitch that has a 3,500 pound towing capacity and 350 pound tongue weight capacity, although I also recommend checking your…

The etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2" #e98846 does not require the exhaust to be lowered during installation, so it's exactly what you're looking for. I really like the matte black finish…

You're looking for a light green wire, exiting terminal #2 of the stoplight switch connector. Tekonsha also recommends using the #7865 pigtail on your vehicle, rather than the one included with the controller. The pigtail has a diode in it to…

The difference between the letter D in your ST175/80D13 and the R in the tire size of the Wheel and Tire ST175/80R13 part #AM31985 that you referenced is the tire construction. D stands for bias-ply which is a less preferred tire construction,…

First, the DOT date code on a tire is 4 numbers. The first 2 are the week and the last 2 are the year. So for example if it was 2314 that means that tire was made in the 23rd week of 2014. There isn't a difference between a tire sitting on the…

We offer both of the trailer tire sizes you mentioned, ST175/80R13 and ST185/80D13. In terms of size they are very close to one another; the ST175/80R13 size measures 24.1-inches in diameter and 6.9-inches wide while the ST185/80D13 size measures…

A 13 inch trailer wheel is likely going to use 1/2 inch lug nuts. The torque spec is the same for a 13 inch wheel whether it is steel or an alloy wheel; 75 to 85 foot pounds. I have included a picture with a handy chart with torque values for you as…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

The etrailer Trailer Hitch Receiver #e98846 will have a larger notch for the exhaust hanger on your 2011 Nissan Rogue that is coming into contact on your Draw-Tite Hitch #75902. I felt that the best way to show you is with a picture that I have…

The best option for you is a reducer like #HT02. This reducer transforms your 2" receiver into a 1-1/4". This lets you use all your 1-1/4" hitch accessories, such as bike racks, cargo carriers, or ballmounts with a 2" hitch. I…