Trailer Wiring Harness Installation - 2014 Toyota Sienna Video

The information on our trailer hitches come from the hitch manufacturers, and those ratings have nothing to do with the actual tow rating of the vehicle. The hitch manufacturers rate the hitch for what it is capable of, independent of the vehicle. To…

I recommend just changing the tires to the Kenda Karrier S-Trail ST145/R12 Radial Trailer Tire #AM10130 on your 2021 Forest River Rockwood 1940LTD. This will allow you to maintain your same wheels and tire clearance that you currently have. They have…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

Yes, the etrailer.com hitch part #E98853 that you referenced does fit your 2013 Toyota Sienna all wheel drive. I attached an install video for this hitch for more info for you to check out as well! Then for wiring the kit I recommend is the Tekonsha…

Yes, you will need to buy the wiring harness separately and we do have installation videos for both of the options for your Sienna. If your 2015 Toyota Sienna is not a SE model you will need the Curt T-Connector Vehicle Wiring Harness item #C56261.…

The Hopkins #HM11143495 that we have available for a 2012 Toyota Sienna is designed only to fit the SE (Sport Edition), so I will need to steer you in a different direction, unfortunately. For your XLE (Executive Luxury Edition), I recommend going…

The Curt hitch part #C13105 which is a fit for your 2015 Toyota Sienna comes with bolts that are size M12-1.25x40. I attached an install video for this hitch for you to check out as well.

From my research on the Harbor Freight 4x8 folding trailer uses 4.80-12 tires on a 12 inch wheel for the 1195 lb capacity trailer and a 5.30-12 for the 1720 lbs capacity trailer. It is a good idea to check your existing tires to see which size they…

The only trailer component that determines the speed rating of the trailer is the tires. All you have to do is simply replace your current tires with one that is rated for highway use, like the Kenda Loadstar #AM3S120 that you referenced, and you are…

You have a couple options at this point. You can either find a way to route the wire through the firewall either by finding a hole in the firewall or drilling a hole in the firewall, or you can route the wire out through one of the drain plugs in the…

I looked in the owner's manual for your 2017 Toyota Sienna and the tongue weight capacity is 350 lbs. I understand that the Draw-Tite Max-Frame Trailer Hitch Receiver part #76112 has a 500 lbs tongue weight capacity. However, the vehicle and…

Typically, you want between 16" and 24" of wire to extend past the trailer tongue but it really depends on your particular vehicle and the location of the trailer plug on your vehicle. You want enough wire so that there is not tension on…