Does etrailer.com Hitch part # E98853 Fit 2013 Toyota Sienna AWD

Question

Question:

Does this hitch receiver and suggested wiring work on a 2013 Toyota Sienna AWD model?

asked by: Derek S

0

Expert Reply:

Yes, the etrailer.com hitch part # E98853 that you referenced does fit your 2013 Toyota Sienna all wheel drive. I attached an install video for this hitch for more info for you to check out as well!

Then for wiring the kit I recommend is the Tekonsha part # 118498 which is easy to install and very reliable.

expert reply by: Jameson C

0

Answer 1

The benefit to a non-powered trailer wiring harness is that it's a bit easier to install since you don't have to run a wire up to the battery of the vehicle. The advantage to a powered kit is that it does a better job protecting the taillight…

view full answer...

Answer 2

You are correct that both the etrailer.com Class III Trailer Hitch #e98853 and the Draw-Tite Max-Frame #76112 feature the same hidden-crosstube design that allows only the 2" receiver to be seen on the vehicle. This is typically the style I…

view full answer...

Answer 3

The trailer wiring harness I recommend for your 2015 Toyota Sienna SE AWD is the Tow Ready T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector #118498. This wiring harness installs in line with your vehicle's factory wiring behind the…

view full answer...

Answer 4

The etrailer hitch part #e98853 is the best trailer hitch option for your 2017 Toyota Sienna as it's mostly hidden, has the best towing capacities, and has a matte finish which makes it a little less visible as well. I attached an install video…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

Yes the etrailer hitch part #e98853 does fit your 2017 Toyota Sienna SE.

view full answer...

Answer 7

I recommend installing the Thule WingBar Evo roof rack on your 2024 Toyota Camry. I prefer this roof rack as the crossbars use a 2 piece channel seal which makes it easy to slide in a Kayak Carrier #LR28FR. You will need the Crossbars #TH711420, Feet…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

The best trailer hitch option for the 2020 Toyota Sienna is etrailer.com Trailer Hitch Receiver part #e98853 because it is a concealed cross tube option so the only portion of the trailer hitch that will be visible once installed is the receiver…

view full answer...

Answer 10

I recommend the etrailer.com Trailer Hitch Receiver part #e98853 for the 2020 Toyota Sienna because of it's concealed cross tube design. The only portion of the hitch that is visible once installed is the receiver square which sticks through the…

view full answer...

Answer 11

For your 2020 Toyota Sienna I highly recommend the etrailer.com Trailer Hitch #e98853 because of its hidden-crosstube design and unique matte black finish that matches the Sienna well and is less prone to scratches. This Class III hitch will line up…

view full answer...

Answer 12

Yes, the etrailer Hitch item #e98853 will work perfect with a VelociRax bike rack. This hitch has a 525 lbs maximum tongue weight capacity and there is plenty of room past the hitch pin hole. The etrailer Hitch item #e98853 is confirmed to fit a 2017…

view full answer...

Does etrailer.com Hitch part # E98853 Fit 2013 Toyota Sienna AWD

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching