Trailer Hitch Installation - 2018 Subaru Impreza Video

You'll want to scrape off the undercoating so that the hitch will mount to a flat surface. If you expose any bare metal from the scraping, you can shoot any bare metal with a quick shot of rust inhibiting spray paint if you wish. Since the hitch…

We haven't had any ground clearance issues with any of the trailer hitches we offer for your 2018 Subaru Impreza including the Draw Tite part #36644 that you mentioned. When we installed the 2 inch hitch part #76209 on a 2018 Impreza like yours…

The Curt Class I Trailer Hitch Receiver #C11465, the Draw-Tite Class I Sportframe Trailer Hitch Receiver #DT24959, and Draw-Tite Class II Trailer Hitch Receiver #36644 are all within roughly a 1/4inch of ground clearance when installed on your 2018…

The correct EcoHitch Trailer Hitch Receiver for a 2012 Subaru Impreza Hatchback is part #306-X7211 just be sure you have the center knock-out panel in the rear bumper fascia. The hatchback and wagon are the same for all intents and purposes regarding…

According to EcoHitch, the hitch has a 525 lb tongue weight capacity. If the vehicle itself has a lower tongue weight capacity, you'll need to abide by whichever rating is lower. This hitch is a fit for the 2012-2016 Subaru Impreza Sedan, Non-WRX…

I checked with Curt and was able to get an install picture that shows the Curt hitch #C13155 installed on a similar Mercedes as your 2013 GLK 250.

The reason class II trailer hitches are not recommended for your 2011 Subaru Impreza Outback Sport is because your vehicle has a maximum towing capacity of 1,000 lbs and maximum tongue weight capacity of 200 lbs. I confirmed these capacities with my…

Yes, rear fascia trimming is required to install the EcoHitch part #306-X7261 on your 2014 Subaru WRX Hatchback. The rear fascia has to be cut so that the shank of the hitch will fit. I attached a picture that shows where you'd need to trim the…

It sure will! The Draw-Tite Max Frame Trailer Hitch Receiver #DT92MR you were looking at was designed specifically for the 2021 Ford Mustang Mach-E. This hitch has a 350lb tongue weight rating and 3500lb trailer weight rating making it a perfect…

I recommend the Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2", part #DT92MR, hitch receiver. This hitch receiver has a maximum tongue weight of 350lbs and a maximum tow weight of 3500lbs. I like the Draw-Tite hitch…

I looked up the towing capacity for your 2018 Subaru Impreza Wagon and it looks to have a capacity of 1,164 to 1,325 lbs depending on how it's equipped. But you need to verify that in your owners manual. For a hitch then you'd want the Draw…

Although we haven't had a chance to test fit and shoot a video of the the Draw-Tite Sportframe Trailer Hitch Receiver #DT24959 on a 2017 Subaru Impreza, I was able to go to the warehouse and get some measurements for you. From the top of the…