Trailer Hitch Recommendation for 2018 Nissan Rogue with Backup Camera and Handsfree Liftgate

Question

Question:

trailer hitch for a nissan rogue 2018 with lift gate sensor and backup camera

asked by: G W

0

Expert Reply:

The etrailer.com hitch part # E98846 is the hitch I recommend for your 2018 Nissan Rogue that has the handsfree lift gate sensors and back up camera. While Nissan recommends a special harness to allow the sensors to still work after a hitch install we've found that it's not needed and you can just kick to either side of the hitch and it work fine. Also, the camera would not be affected either.

I attached an install video for this hitch for you to check out as well.

expert reply by: Jameson C

0

Estella A.

4/28/2020

want to purchase

Reply

Chris R.

4/30/2020

To purchase you can click on the etrailer # e98846 to head to its product page and from there add it to your cart and check out! Another option is to call our Customer Service team and they will be happy to walk through the process with you.

Reply

Answer 1

Yes, we have had issues in the past with trailer hitches and accessories affecting the Rear Automatic Braking system on the 2019 Nissan Rogue. Basically it will detect the hitch and carrier and may cause the brakes to activate while you are backing…

view full answer...

Answer 2

The rear hatch sensors will still be functional with the etrailer.com Trailer Hitch Receiver #E98846 installed on your 2018 Nissan Rogue. You will need to kick your foot to the sides of the receiver to activate the sensors but there is no tampering…

view full answer...

Answer 3

The etrailer.com Trailer Hitch Receiver #E98846 that fits your 2017 Nissan Rogue uses M12-1.25 x 35mm hex bolts, which are included with the hitch. I have added a link to a video showing this hitch being installed on a '17 Rogue as well as a link…

view full answer...

Answer 4

The hands free liftgate sensor for your 2019 Nissan Rogue will still be operational with the installation of an aftermarket trailer hitch. However, you will need to place your foot on either side of the receiver tube opening in order to activate it.…

view full answer...

Answer 5

I do have a solution that will allow you to carry a bike rack with your 2018 Nissan Rogue, but due to the spoiler you have at the rear of your vehicle you'll have to go a different route since there aren't any trunk options that fit. The…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

The maximum tongue load is 110lbs on your 2018 Nissan Rogue per the owners manual. This means the scooter carrier you would use will need to weight less than that to be safely transported on the vehicle. While trailer hitches like our own…

view full answer...

Answer 8

On your 2018 Nissan Rogue, the Hopkins Plug-In Simple Vehicle Wiring Harness with 4-Pole Flat Trailer Connector item #HM11143645 has a wire that runs to the battery for 2 reasons. The first and main reason is that there is no other source of constant…

view full answer...

Answer 9

I took a look at the online version of the owner's manual for a 2018 Nissan Rogue and it does state that the "Maximum Tongue Load" is 110 lbs, like you mentioned. Even if you are not towing a trailer this would apply and you do need to…

view full answer...

Answer 10

Once the Curt #C13204 is installed, the sensors located in the center of the under bumper area will be obscured by the square hitch receiver tube. However, there are sensors under the right and left side of the bumper and those will function just…

view full answer...

Answer 11

If you are having trouble getting the hardware to install for your Draw-Tite trailer hitch then what you need to do is soak the bolt holes with WD40, wait for a few minutes to let it set in, and then use a wire brush like part #814113 to clean out…

view full answer...

Answer 12

The trailer hitch I recommend for a 2019 Nissan Rogue is the etrailer Trailer Hitch Receiver part #e98846. The etrailer hitch has a 525 lb tongue weight capacity which is the highest currently available. However, the vehicle is limited to a tongue…

view full answer...

Trailer Hitch Recommendation for 2018 Nissan Rogue with Backup Camera and Handsfree Liftgate

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching