Trailer Hitch Installation - 2018 Ford Escape - Draw-Tite 75782 Video

To install the Draw-Tite Activator Trailer Brake Controller #5504 that you referenced to your 2017 Nissan Titan, all you will need is the Plug-In Wiring Adapter #3050-P if the truck is equipped with the factory 7-Way. One end of the harness will plug…

I have a solution for you but I was unable to find any wiring diagrams that specify which wires are which on the 2015 Nissan Titan. Because of this, you'll need to manually trace and test each wire to determine which wire controls which function.…

The best trailer hitch for your 2018 Ford Escape is the etrailer.com Class III part #E98866. This is because it features a sleek hidden crosstube design where only the 2 inch receiver is visible behind the vehicle (see attached image). Its unique…

The correct Curt T-Connector Vehicle Wiring Harness for a 2019 Ford Escape is part #C95FR, not part #C56320 which is a fit for a 2017 - 2018 Ford Escape.

Thank you for your purchase of the etrailer Trailer Hitch Receiver #e98866 for your 2014 Ford Escape. The issue you are seeing with the hitch not appearing wide enough is called "flexing" and can be an unfortunate byproduct of the what…

When we installed the Draw-Tite Class III Max Frame Receiver Hitch #75782 on the 2018 Ford Escape we did indeed measure a distance of 16-1/2 inches from the ground to the top inside portion of the receiver. This measurement is taken with the vehicle…

For your 2018 Ford Escape SE I recommend the etrailer.com Class III Trailer Hitch #E98866 because of its hidden crosstube design that allows for a clean factory appearance because only the receiver itself is visible (see attached image) and unique…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

It is not a requirement to have your 2018 Ford Escape elevated in order to install the etrailer Trailer Hitch Receiver #e98866. It can help but it is certainly not required; most people do not elevate their vehicles during the installation of a…

For your 2014 Ford Escape Titanium, you do not need to relocate the sensors but the working areas will be limited to either side of the trailer hitch receiver opening. For the least amount of interference, I recommend the Draw-Tite Max-Frame Trailer…

The only carrier we have that meets both measurements is the Let's Go Aero GearSpace #HGK819 that measures 68 x 33 x 40 inches, however this is a premium enclosed carrier and it is not affordable as you mentioned. The next best option for size…