Trailer Hitch Installation - 2017 GMC Terrain - Curt 13591 Video

The Curt Class III hitch you referenced, part #13591 will fit your 2015 Equinox. However, please realize that the installation hardware you originally used is designed for a one-time use only. You can certainly reuse the hitch, but I'd…

When we installed Draw-Tite trailer hitch #36408 on a 2013 Chevy Equinox (it also fits 2014 models) it measured 14-1/4 inches from the ground to the top of the receiver opening. But to the bottom of the hitch it would be approximately 12-3/4 inches…

The bolts included in the Draw-Tite Trailer Hitch Receiver #36408 for your 2005 Chevrolet Equinox are M12-1.75 x 40mm. If you are having trouble with the bolt starting in the threads of your weld nuts, most likely there is still some dirt or…

We installed the #36408 on a 2012 Chevy Equinox just like yours and the install bolts that came with it did end up fitting just fine. The problem you are experiencing has to be related to the weldnuts of your vehicle being dirty/corroded. Normally…

I spoke with my contact at Curt about your 2014 Acura MDX. They told me that the torque is 139 ft-lbs for the M14 bolts for the part #C13146 hitch installation. I am unable to tell you why the specs for the Acura OEM hitch is so much lower. As far as…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…