Trailer Hitch Installation - 2007 GMC Sierra Classic - Curt Video

When initially setting the power on your Prodigy P3 Brake Controller #90195 you will follow the process you stated. I've attached these instructions to further assist. You will get up to 25 mph and release the gas pedal and then fully engage the…

Trailer hitch installs and trailer wiring installs are totally separate processes. It wouldn't be a situation where "well, you're already half way there may as well do the wiring too." So if you wanted to start with a hitch now like…

While I can sympathize with your issue, it is not safe to tow a trailer if you only have a 2" hitch ball and your trailer coupler is designed for a 2-5/16" hitch ball, even for a short distance; the insecure connection between hitch ball…

According to an online copy of the owner's manual, for bumper pull towing, the 2004 Silverado Regular Cab Long Bed with the 4.3L engine can tow 4400 lbs with the automatic transmission and 3.08 rear axle or 4900 lbs with the 3.42 axle. For a…

For bumper pull trailers the tongue weight is going to be between 10 and 15 percent but for a fifth wheel trailer or gooseneck trailer the pin weight is going to be right at 20 percent.

Of the Curt hitches that you mentioned only the #C15323 is a confirmed fit for your 2003 Chevy Silverado 1500HD. I attached a couple pictures that show exactly how tight this hitch will fit to the rear bumper of the truck as well.

Yes, the Curt Trailer Hitch Receiver #C15323 will fit on your 2005 Chevrolet Silverado 1500. This receiver is designed to fit the standard factory bumper but does not screw into the bottom of the bumper.

A lot of the trailer hitches available for the 2013 Chevrolet Silverado fit a span of over multiple years as long as the generation does not change. For example the etrailer.com Trailer Hitch Receiver part #e98849 fits 1999 - 2013 Chevrolet Silverado…

For trailer wiring the #HM40975 that you referenced would be the correct part to get since it sounds like you have correct harness behind your bumper. This will plug right into it. The harness should have a round connector at the end of it that will…

The P3 brake controller, #90195, will go into a sort of sleep mode after it detects no movement for 15 minutes. While it is on it does not draw very much power. What you can do to make sure it goes to sleep is exit the truck after turning it off,…

The etrailer.com Trailer Hitch Receiver #E98860 will fit (as of early 2019) a 2014, 2015, 2016, 2017 and 2018 Chevy Silverado 1500 and GMC Sierra 1500 as well as some 2019 models of both truck. This is a Class IV hitch with a 2 inch receiver, 1,000…

The Curt hitch part #13332 was designed to specifically fit your 2000 Chevy Silverado so the great news you do not need to measure anything on your truck to know it will fit. I attached a link to an install video for the hitch on a 1999 Silverado…