Trailer Hitch Installation - 2001 Toyota Sequoia - Curt Video

The Hopkins Plug-In Simple Vehicle Wiring Harness for Factory Tow Package - 7-Way and 4-Flat Connectors part #HM11143325 is for vehicles as a replacement to the already existing 7-way. Since you didn't have that connector you will need the kit…

The Hopkins Plug-In Simple Vehicle Wiring Harness #HM11143325 referenced in your question is confirmed to fit your 2007 Toyota Sequoia with the factory tow package. This custom-fit harness will easily install by connecting directly to the built-in…

If your 7-way on your Sequoia was installed at the factory, the 12-volt circuit should be active. Check the fuse box under the hood for a blown or missing fuse. If there's no blown fuse, you trace the 12-volt circuit from the rear of the vehicle…

The Curt MV Weight Distribution system part #C17062 that you referenced weighs 101 lbs.

It is possible that all 2002 Toyota Sequoia models were pre-wired for a trailer connector. You can look to see if yours has the factory plug to install a harness such as #C55246. It will be located on the driver's side plugged into a dummy plug…

To upgrade your 2002 Toyota Sequoia to a 7-Way RV style connector you will need to add a 4-Way to 7-Way adapter, like the Adapter 4 Pole to 7 Pole and 4 Pole, item #37185. There is a 4-Way connector on the back of the adapter that you plug your…

If you have a vehicle specific wiring harness for a brake controller then that would indicate that you have a factory tow package and subsequently would already have a 7-way at the back of your vehicle. The universal 7-way connector #ETBC7 is meant…

For your 2020 Jeep Grand Cherokee I recommend the Tekonsha T-One Vehicle Wiring Harness part #118727. It's custom made for your Jeep and it gives you a 4 way flat trailer connector so you have all the lights to tow a trailer safely and legally.…