Draw-Tite Max-Frame Trailer Hitch Installation - 1999 Chevrolet Silverado Video

It's hard to say exactly why the Curt hitch part #14301 doesn't bolt to the bumper like the OEM hitch but most likely they determined that it didn't add much to the strength of the hitch so they left it off. The hitch has been thoroughly…

The Curt Class IV 2 Inch Hitch #14301 does not bolt to the bumper of your 2008 Chevrolet Silverado. It will bolt to the frame rails of your vehicle. You will need to remove the spare tire to install the hitch, bolt the hitch to the frame rails, and…

It is VERY important that you use all of the included installation hardware when you install the Curt Hitch #13575 on your vehicle. If the bolts are not wanting to line up I would recommend you loosen all of the installation bolts so that the hitch…

For your 2023 Subaru Outback, I recommend the Curt Trailer Hitch item #C69VV. This hitch is custom fit and bolts to your Subaru with included hardware. This is a class III hitch with a 2" receiver. I really like this hitch because it is an easy…

The main difference between a Class III hitch and a Class IV hitch is the capacities they set for the hitches. Class III hitches are rated for up to 6,000 lbs GTW with 600 lbs TW whereas a Class IV is rated for up to 12,000 lbs GTW and 1,000 TW. For…

The Draw-Tite #76271 trailer hitch that fits your 2019 Subaru Forester is a straightforward install and any qualified local mechanic should be able to do it easily. We are an online retailer and are not affiliated with any type of installers so there…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

I can help explain the difference between the listing for towing weight and weight distribution towing capacity for you. Let's use the Draw-Tite Class V Trailer Hitch #DT45502, which is a confirmed fit for you 1992 Ford, that you were looking at.…

In regards to the Curt Trailer Hitch Receiver part #13322 which is a fit for your 2006 GMC Sierra 1500, the bolts that are used to secure the trailer hitch to the bumper are M14-2 x 40mm hex bolts. Therefore, the weld nuts inside the bumper are…

Sinks like the LaSalle Bristol 14-3/4" x 12-1/4" Rectangular Lavatory Sink - ABS - Parchment #34416186PPA you referenced are not glued in. They are sealed with silicone caulk like #0160297 and secured with the under counter mounting…

The down tube for the LaSalle Bristol 14-3/4" x 12-1/4" Lavatory Sink #34416186PPA needs to be attached to the sink with an appropriate sealant or glue. It is not screwed into place. We do have smaller strainer baskets with the LaSalle…

Westin Perfect Match Series Rear Step Bumper #31006 fits 2001 Chevy Silverado 1500 light duty and 2500 light duty models so if your 1500 is a light duty (anything other than a 1500HD) then this bumper is an excellent option. If you have an HD model…