TorkLift SuperHitch Magnum Trailer Hitch Installation - 2021 Ford F-450 Super Duty Video

The Torklift Hitch Extension part #TLE1636 that you referenced can tow a trailer that weighs 6,700 lbs like you what you have but you would need to use a weight distribution system with it to have the needed capacity as without a WD system it's…

There is one extender that will work with the 3 inch factory hitch on your 2017 Ford F-350 Super Duty, the TorkLift Cannon Hitch Extension, and it comes in three different lengths: 36" Long #TLE1636, 42" Long #TLE1642 and 48" Long…

We do offer hitch extensions for the factory 3" trailer hitch receiver on your 2017 Ford F-350 Super Duty, but there is not one that is 24" long. The shortest extension available is the TorkLift Cannon Hitch Extension - 3" Ford Super…

We haven't had the chance to install the Curt Class V Trailer Hitch Receiver #C15703 on the 2008 Chevy Silverado 2500 so I don't have exactly how far beneath the bumper the receiver will sit, however I did go out to our warehouse to take a…

The only TorkLift trailer hitch that fits your 2005 GMC Sierra 2500 short bed is #TLC1204. This is the SuperHitch Original Class V hitch with dual 2 inch receivers. It is rated for 1,700 pounds tongue weight and 17,000 pounds gross trailer weight.…

For the weight you are pulling with your 2007 Chevy Silverado 2500 short bed 4x4 Duramax, I recommend the Firestone Ride-Rite Red Label Extreme Duty Air Helper Springs - Rear Axle #F2700. These air springs are adjustable from 5 psi to 150 psi and…

Yes, the factory bump stops will need to be removed to install the Air Lift LoadLifter 7500 XL Air Helper Springs #AL86KV on your 2020 Ford F-350.

You're correct that adding a trailer hitch, like the Curt you referenced #C15802, that is rated higher than your truck will not increase your truck's capabilities. Trailer hitches are often overrated for the vehicles they're designed for.…

The Curt Trailer Hitch Receiver - Custom Fit - Class V Commercial Duty - 2-1/2" #C15802 has 3 different hole dimensions for mounting. The two holes closest to the receiver are 36.31 inches on center. The widest holes are 37 inches on center and…

I checked with Torklift and the #TLM9000 and #TLM9001 are designed to fit the standard weight distribution systems like your Reese. It has the 3/4 inch holes and the distance between them of 1-1/4 inches. Some of the Torklift shanks use larger…

I recommend the Curt Class V Receiver Hitch part #C15802 for the 2019 Ford F-250 Super Duty because because it offers more towing capacity than the B & W option and the installation is a bit easier since it is one solid piece that you bolt up to…

The TorkLift Cannon Hitch Extension - 3" Ford Super Duty Factory Hitch - 48" Long #TLE1648 you were looking at itself is not weight distributing, the chains and turnbuckles used are to keep the extension stable. When used with a standard…