Tekonsha T-One Vehicle Wiring Harness Installation - 2019 Cadillac XT4 Video

Yes, there is a hitch for your 2024 Cadillac XT4. The best one is going to be the Curt Hitch item #C39FR. This hitch is custom fit and bolts to your Cadillac with included hardware. It is a class III hitch with a 2" receiver. I really like this…

Yes, the Curt Hitch item #C39FR will be concealed by the rear panel when you are not using the hitch on your 2023 Cadillac XT4. This hitch is custom fit and bolts directly to your XT4 with included hardware. I have attached an installation video and…

To tow a small trailer with the 2020 Cadillac XT4 you will need a hitch, wiring, ball mount and lock. For the hitch, I recommend Curt Trailer Hitch Receiver part #C39FR which is a concealed cross tube hitch so the only part of the hitch that is…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

You will be able to re-install the rear panel on your 2020 Cadillac XT4 after installation of either hitch that fits your vehicle, the Curt Trailer Hitch Receiver #C39FR. Additionally, if you plan on towing and need a trailer wiring harness, the…

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…