T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
(26 reviews)
Price: $24.54
In Stock
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
Item # 118795
Retail:$31.46
Our Price: $24.54
You Save: 22%
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
- All Info
- Reviews (26)
- Q & A (0)
- Photos
Tekonsha Custom Fit Vehicle Wiring - 118795
- Custom Fit
- 4 Flat
- Trailer Hitch Wiring
- Tekonsha
- No Converter
Quickly and easily install a 4-way trailer connector on your vehicle with this custom wiring harness. T-One connector plugs directly into existing wiring - no cutting, splicing or tapping required.
Features:
- Provides a 4-way flat trailer connector at the back of your vehicle to power your trailer's signal lights
- Compatible with 5-pole, 6-pole and 7-pole adapters (sold separately)
- Connects quickly and easily - no cutting or splicing of wires
- Locate connection point behind the rear bumper
- Plug in T-connector
- Constructed of 16-gauge bonded wire
- Comes with dust cap for 4-way flat connector
Specs:
- Maximum amperage:
- Stop/turn lights: 5 amps per circuit
- Tail lights: 7.5 amps per circuit
- 1-Year limited warranty
Installation
This custom-fit T-One connector plugs into your vehicle's wiring harness. You will find the harness under the vehicle in the center, behind the rear bumper.
Once installation is complete, the 4-way flat connector will be stowed beneath your vehicle, near the trailer hitch. A mounting bracket (sold separately) is recommended to keep the connector secure.
It is recommended that you use a small amount of grease on all electrical connections - the plugs on your automobile and the 4-pole connector itself - to help prevent corrosion.
118795 Tow Ready T-1 T-Connector - 4 Wire
Installation Details
This Product Fits The Following Vehicles
- 2019 - 2024 Cadillac XT4
- 2019 - 2024 Cadillac XT4 with factory Tow Package
California residents: click here
Customer Satisfaction Score:
96% were satisfied with this product
4% of customers were not satisfied
- Product did not meet expectations
- Alternate product found
- Defective
Customer Reviews
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector - 118795
Average Customer Rating: 5.0 out of 5 stars (26 Customer Reviews)
Quickly and easily install a 4-way trailer connector on your vehicle with this custom wiring harness. T-One connector plugs directly into existing wiring - no cutting, splicing or tapping required.by: Donald04/06/2024
2023 Cadillac XT4
This was literally plug and play. The harness was neat and has a great look - just the right amount of wire too.
by: Gloria 09/13/2021
The hitch and other parts arrived in just a few days. The hitch install went great thanks to the helpful videos posted by etrailer on both the hitch and wiring install. The video helped me have all parts I needed for a quick and easy install on something I have never done before. Thanks so much etrailer!
by: Ty08/19/2021
Fast shipping, All parts fit as advertised. Instructional videos were a plus.
Trailer hitch was an easy install about 80 minutes, trailer wiring was plug and play no splicing of wires which was great.
by: Gary 04/22/2021
Very easy to install plug it in and your ready to go.
by: Jon 06/16/2021
Great product. Instructions were easy to follow.
by: Frank 07/12/2021
2021 Cadillac XT4
nice product it fits my trailer wiring
by: Robert 10/02/2022
3rd hitch always perfect fit and arrives early.
by: Jean P01/05/2022
vert good service but the deleivray service Isa too long
by: Russ04/27/2022
All good. Thx
by: Timothy 08/25/2020
It works and is simple plug-n-play, i.e. no splicing required.
by: Pete 11/07/2023
by: Don08/05/2019
GREAT
by: don b.03/21/2019
fits great
by: Sally 05/16/2023
by: Jim 05/29/2024
by: Ray 09/06/2022
2019 Cadillac XT4
by: Marybeth03/30/2021
by: Robert 06/08/2023
by: Monroe10/20/2021
by: Donald 05/05/2023
by: John 12/07/2021
2021 Cadillac XT4
by: Don 04/14/2023
by: Clifton 02/11/2021
by: Joseph05/07/2022
by: Alan 09/20/2021
2021 Cadillac XT4
25
26
Show More Reviews
See what our Experts say about this Tekonsha Custom Fit Vehicle Wiring
- Is Fascia Trimming Required to Install Curt Trailer Hitch on 2020 Cadillac XT4There is no type of fascia cutting or trimming necessary whatsoever to install the Curt Trailer Hitch Receiver # C39FR on your 2020 Cadillac XT4. The fascia has a removable panel which will allow you to access the trailer hitch when you need to and put the panel back on when you aren't using the hitch. The fact you can remove that panel and easily access the hitch is why you don't need to trim or cut any fascia. I have added a link to the instructions for you to check out as well of the...
view full answer... - Can the Rear Panel be Placed Back on the Bumper w/ the Hitch Installed on a 2023 Cadillac XT4Yes, the Curt Hitch item # C39FR will be concealed by the rear panel when you are not using the hitch on your 2023 Cadillac XT4. This hitch is custom fit and bolts directly to your XT4 with included hardware. I have attached an installation video and some photos of the hitch with and without the cover for you to check out. If you are planning on towing you will also need a wiring harness item # 118795 and a ball mount kit item # C45534.
view full answer...
- Can the Rear Panel be Placed Back on the Bumper w/ the Curt Hitch Installed on a 2023 Cadillac XT4?Yes, the Curt Trailer Hitch item # C39FR will be concealed by the rear panel when you are not using the hitch on your 2023 Cadillac XT4. This hitch is custom fit and bolts directly to your XT4 with included hardware. I have attached an installation video and some photos of the hitch with and without the cover for you to check out. If you are planning on towing you will also need a wiring harness item # 118795 and a ball mount kit item # C45534.
view full answer... - Will Rear Panel be Able to Hide Trailer Hitch on 2020 Cadillac XT4You will be able to re-install the rear panel on your 2020 Cadillac XT4 after installation of either hitch that fits your vehicle, the Curt Trailer Hitch Receiver # C39FR. Additionally, if you plan on towing and need a trailer wiring harness, the right one for your '20 XT4 is the T-One Vehicle Wiring Harness # 118795.
view full answer... - Parts Needed To Tow a Trailer With a 2023 Cadillac XT4First you will need the Curt Trailer Hitch Receiver # C39FR for your 2023 Cadillac XT4. This receiver is custom fit and will fit behind the factory removable panel on your rear bumper fascia. The 4-Way T-One Vehicle Wiring Harness # 118795 will plug into the factory connector just behind the impact structure on your rear bumper. This will be easy to install when you are installing the Curt receiver above. The Mounting Brackets # 18140 and # 18144 will allow you to secure the 4-way to...
view full answer... - Trailer Hitch Confirmed to Fit a 2022 Cadillac XT4Yes, the Curt Trailer Hitch Receiver # C39FR is confirmed to fit all models of the 2022 Cadillac XT4. This hitch is made in the USA, has a bolt-on, no-drill installation and will provide you with a 2" hitch receiver which is the most common size used for hitch mounted accessories such as bike racks, cargo carriers and ball mounts. If you plan to do any towing with your XT4, you can round out a towing package using the T-One Vehicle Wiring Harness # 118795 and the etrailer Ball Mount Kit...
view full answer... - Towing Package To Tow Small Trailer With 2020 Cadillac XT4To tow a small trailer with the 2020 Cadillac XT4 you will need a hitch, wiring, ball mount and lock. For the hitch, I recommend Curt Trailer Hitch Receiver part # C39FR which is a concealed cross tube hitch so the only part of the hitch that is visible once installed is the receiver. I recommend using Tekonsha T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector part # 118795 for the wiring. The harness plugs into the vehicle wiring behind the rear bumper for an easy install....
view full answer... - Which etrailer Hitch Fits 2019 Cadillac XT4The only hitch that we have, as of June 2023, that fits your 2019 Cadillac XT4 is the Curt part # C39FR. The etrailer hitch that you asked about, # e62AR, actually fits the XT5 models so it would not work for you. If you were looking for trailer wiring too the Tekonsha kit part # 118795 is what I recommend as it installs very easily without requiring any splicing.
view full answer... - Can I Replace Rear Panel on 2022 Cadillac XT4 with Draw-Tite Hitch InstalledYes, once the Draw-Tite Max-Frame Trailer Hitch Receiver # 76266 is installed on your 2022 Cadillac XT4 you'll be able to place that rear bumper fascia cover back over it for an OEM look. I'm attaching an installation video and some photos for you to check out about this. If you're planning on doing some towing with this hitch then I also recommend picking up the T-One Wiring # 118795, the Mount Bracket # 18144, and the Ball Mount Kit # C45154. Attached are some additional videos for...
view full answer...
- Complete Wiring And Hitch For A 2020 Cadillac XT4I went ahead and checked out the: -Draw-Tite Max-Frame Trailer Hitch Receiver # 76266, and was able to find a hitch height of 18". Additionally, if you need help finding the correct rise/drop for your application, I'd be happy to assist. All you're going to need to do is measure the distance from the ground to the top of the receiver, then from the ground the bottom of the trailer coupler, and subtract the two measurements. The difference is the rise/drop you need. For instance, if...
view full answer... - Will The Rear Hitch Panel Still Hide The Curt Trailer Hitch Receiver On My 2020 Cadillac XT4?Yes, you can continue to use the rear hitch panel with the Curt Trailer Hitch Receiver # C39FR installed on your 2021 Cadillac XT4. This will allow you to still maintain the clean vehicle appearance when you are not towing. You can simply remove the panel by releasing the 2 quarter turn fasteners on the bottom of the panel and tilting the panel until the upper tabs can be easily pulled away from the bumper fascia. Then you are ready to insert your ball mount for towing or hitch mounted...
view full answer...
Do you have a question about this Custom Fit Vehicle Wiring?
Info for this part was:
Edited by:
Lindsey S
Video by:
Joshua S
Video Edited:
Jacob T
Video Edited:
Chris R
Installed by:
Kathleen M
Updated by:
Wilson B
Updated by:
Isabelle B
Written by:
Alexander C
Test Fit:
David F
Test Fit:
Ryan G
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.