Trailer Brake Controller Installation - 2008 Ford F-350 Cab and Chassis Video

To start you will need a base plate, I recommend the Blue Ox Base Plate Kit - Removable Arms #BLU93FR. It is a hidden and sturdy design to spread towing force evenly to prevent stress on the towed vehicle. Next you will need a tow bar and safety…

Brake controllers such as the P3 #90195 install to a harness located behind the center console. I have linked a video that should help. It is on an earlier model year cab and chassis but its in the same location. On the full size van models such as…

A trailer that is over 80 inches wide is required by DOT regulations to have rear clearance lights. An over 80 inch taillight kit, like part #TL16RK, will have the side clearance light built into it. An under 80 inch taillight does not have the…

I checked the owners manual of a 2016 GMC Canyon it states that the 4x4 models that have a Neutral and Four-Wheel Drive Low setting can be flat towed. For a base plate kit for your Canyon you would want the part #RM-523182-4 that has been confirmed…

It is necessary to disconnect the negative battery cable according to the manufacturer to protect your vehicle electronics. Some vehicles have some built in battery capacitors that keep the radio presets and some even do the seat memory settings.…

It sounds like you are on the right track for tracking down where the issue is. That said, the integrated brake controllers they were putting in trucks around 2008 weren't as reliable as the ones they've been installing since then. Especially…

Hey Scott, If you're wanting a brake controller that will plug into your factory wiring harness and won't give you any errors then I recommend going with the Tekonsha Prodigy P3 #90195 along with the Tekonsha Plug-In Wiring Adapter #3034-P.…

For a plug and play installation of the Prodigy P3, part #90195 on your 2015 Ford F-350 you can use part #3034-P. This harness will plug into the factory brake controller port located behind the access panel in the center of the dash on the passenger…

The brake controller I recommend for your 2018 E-450 is the Prodigy P3, part #90195. This is one of our most popular because it is easy to install and operate. You will also need a plug-in adapter, part #3034-P. This will plug into the harness on…

There is not currently an adapter available so you will have to splice some wires together to install the Brake Buddy Stealth Supplemental Braking System - Proportional #HM39530 in your 2020 Jayco Greyhawk. The brake controller of this system has 4…

Yes, there is a plug under the dash on a 2017 Ford F-53 Chassis. Therefore, if you are using the Brake Buddy Stealth Supplemental Braking System part #HM39530 you can get the Hopkins Plug-in Simple Brake Wiring Adapter part #HM47715 for a plug and…

You can have a 2-5/16 inch hitch ball on either a 1 inch or 1-1/4 inch shank. The nut on a hitch ball with a 1-1/4 inch shank takes a wrench with a 1-7/8 inch socket. A hitch ball with a 1 inch shank will take a wrench with a 1-1/2 inch socket. You…