Trailer Brake Controller Installation - 2004 Ford Van 3035-P Video

If you have a vehicle specific wiring harness for a brake controller then that would indicate that you have a factory tow package and subsequently would already have a 7-way at the back of your vehicle. The universal 7-way connector #ETBC7 is meant…

Your P3 #90195 is a great controller and will work great in your 2008 Ford E-350 Van. For wiring you will need to start with a 4-way for the turn signal functions. For that you will need the part #118551. Next you will need the part #ETBC7 which will…

First, the trailer hitch I recommend for your 2007 E-150 is the Draw-Tite Ultra Frame Trailer Hitch, part #41945. This is a Class V hitch and it has a 2-inch receiver opening. The trailer wiring I recommend is the Hopkins Plug-In Wiring #HM11140495.…

To install a brake controller on your 2007 Ford E-350 Van without factory wiring you will need to have a 4-pole trailer connector on the rear of your vehicle and then you will need to hardwire the brake controller with the Brake Controller 7 and 4…

E-tracks are typically the stronger of the two, but X-track is more versatile since you can mount them horizontally or vertically. Choosing between the two really depends upon how you plan to use them. If you are installing something in a truck bed,…

I have exactly what you need to install a 7-way trailer wiring harness on a 2001 Ford E-350. That said, they don't make a direct plug and play 7-way for this vehicle so you will need to start with a 4-way first like the T-One Vehicle Wiring…

Absolutely. You can manually apply the trailer brakes independently of the vehicle brakes by depressing the control knob, as shown in the provided diagram and as mentioned on page 5 of the instructions I've linked for you. I've linked to a…

If your existing 4-pole harness is a factory part that plugs in to an OEM connector like those on Tow Ready harness kit #118242, you can have both harnesses active at the same time by daisy-chaining then together. If you have an aftermarket 4-pole…

It sounds like you are needing to install a 7-Way connector at the rear of your 2005 Ford E-150. If your Ford Van did not come with the factory tow package (with a 7-way connector), then there will not be a built in socket or harness under the…

We actually have an FAQ article that explains exactly what you need to do to add a 7-Way to a 2008 Ford E-series van with a factory 4-Way wiring harness. I have linked it for you. There is no simple plug-in harness that will work but installation of…

There are a few things you can check to make sure the brakes are adjusted correctly, but it sounds like there may be a short in the system. I would start by checking the trailer wiring connector on the truck and trailer for corrosion. If there is…

Installation of a brake controller on your 2022 Subaru Outback Limited XT will not void the warranty. Hopefully the dealer isn't on crack, but even if they are you're protected under the Federal Magnusson-Moss Warranty Act. Basically, if…