Trailer Brake Controller Installation - 2012 Jeep Wrangler Unlimited Video

If you have a vehicle specific wiring harness for a brake controller then that would indicate that you have a factory tow package and subsequently would already have a 7-way at the back of your vehicle. The universal 7-way connector #ETBC7 is meant…

I have exactly what you need to install a 7-way trailer connector on your 2015 Jeep Wrangler Unlimited. It sounds like you have the factory tow package therefore, all you would need to do is remove the 4-way you have now and replace it with the…

There are a few different trailer wiring harness options for a 2015 Jeep Wrangler Unlimited. The Hopkins Endurance Quick-Install 7-Way Trailer Connector part #HM42190 is only for models with the factory tow package. If you don't have the factory…

There isn't a brake controller wiring harness for a 2014 Jeep Wrangler Unlimited. A brake controller will have to be hardwired in. If your Jeep came with a factory installed 7-Way then you will just need installation kit #5506. The brake…

The best way to secure your two kayaks to the interior wall of your enclosed trailer is by using J-style wall mounts like the Malone J-Dock Storage System 2 Boats #MPG317. This uses J-hooks that get bolted into the wall of your trailer and allow a…

Yes, we have exactly what you need. To convert the 4-way of your Jeep to a 7-way so that it will adapt to your trailer that has a 7-way you have two options. If your trailer doesn't have brakes all you would need is the #37185. This would simply…

Here is an image I have from the Xtreme Off-Road Swing-Up Trailer Jack #ORJW750D in zinc which will have the same dimensions as the black Jack #ORJW750BD you are looking at.

Since you already have a 4-way connector on your 2018 Toyota Highlander you need to use one of our adapter kits to convert it to a 7-way. If the trailer doesn't have brakes you only need to power its lights and the battery so you can use part…

We've confirmed that Curt hitch #C13392 does fit the JK models as well as the JL. I've linked a video of when we installed it on a 2014 JK for you.

You would first need to install a 4-way on your 2016 Jeep Wrangler Unlimited. For that you would need the part #118416 which is a confirmed fit. I attached an install video for this for you to check out as well. Now if your trailer does not have…

One of the great features of the Redarc Tow-Pro Elite Trailer Brake Controller #RED44FR is the versatility when it comes to mounting the control knob. Most brake controllers need to be mounted a specific way with the controls on the face of it. Since…

Most jack manufacturers including Fulton, Bulldog and Dutton Lainson use slotted holes in the jack mounting flange. Three inches apart center to center is considered industry standard. Since the holes are slotted, there will be a bit of wiggle room…