Curt Trailer Hitch Installation - 2020 Honda CR-V C13397 Video

Using the Hidden Hitch 1-1/4 inch to 2 inch Adapter #80303 would reduce the tongue weight that you hitch is currently capable of by 50 percent. This would not be recommended. For example if your existing hitch had a tongue weight capacity of up to…

We offer adapters so you can use the 2 inch bike rack with the 1 1/4 inch receiver hitch. The appropriate adapter for your hitch depends on what class it is. You can use part #HTAD if your hitch is a Class I or Class II and part #80303 will only…

There are indeed two 2" trailer hitches available for your 2020 Honda CR-V; the etrailer #e98848 and the Curt #C13397. These Class III hitches are essentially identical in every way except for the finish/powder coat that they use. I personally…

The trim area is skewed to the drivers side. In the 2020 model year video, at the 4:15 mark you can see that it is skewed to the drivers side, or to say left of the tow hook. What our own installers do is to put one bolt in each side (closest to the…

For Curt trailer hitch #C13397 it is recommended to remove the lower fascia if your 2017 Honda CR-V has the hands-free liftgate option so that it and the sensor bracket can be trimmed. Regardless though removing the fascia or at least loosening it…

In regards to the Curt Trailer Hitch Receiver part #c13397 which is a fit for a 2023 Honda CR-V, the trim diagram shows a cutout 3" wide x 1.375" tall, placed .625" to the right of the center rear fascia support tab. It sounds like…

For a trailer hitch for your 2018 Honda CR-V that will work the best you'd want the Curt hitch part #C13397. This hitch has a crosstube that sits up higher than the other hitches for your vehicle with a hitch opening that welds to the bottom…

For the Curt Trailer Hitch Receiver #C13397, we will have a video when we have the ability to get a 2017 Honda CRV into our installation bay. If you look at the installation details I've attached, you will see the look on the vehicle as well as…

I attached an install video for the T-One trailer wiring harness part #118741 that you referenced on a 2017 Honda CR-V just like yours for you to check out. At the 2:30 mark of the video you'll see our installer digging pretty deep into the…

For your 2019 Honda CR-V the Tekonsha T-One Vehicle Wiring Harness #118741 will work perfectly. This is a custom "plug-and-play" harness that features a high amp capacity for the lights and comes with Tekonsha's great reputation for…

The T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector item #118741 hangs over the back bumper through the rear cargo area when it is in use. The door closing on the wires will not damage it. When its not in use you just roll it up and…

Honda offers a Power Liftgate Sensor Relocation Bracket as part #08U59-TLA-100A for your 2019 Honda CR-V for when you install a hitch like the Draw Tite part #76128 so that the hands free lift gate will still function properly. That said, we've…