Tekonsha T-One Vehicle Wiring Harness Installation - 2012 Toyota Tacoma Video

The definitive way to determine if a vehicle has a factory tow package or any other options is to have a dealer run the VIN number. Although if there is no 7-Way connector at the back of the truck, you most likely do not have a factory tow package.…

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

It sounds like your 2014 Toyota Tacoma did not come with a factory tow package. What can happen sometimes is that on models that did not come with the factory tow package not all of the wiring or contacts will be present. You would either need to by…

It sounds like you have a 6-way trailer connector on your trailer. Either that or a 7-way. If it looks like the picture with 6 round pin holes you have a 6-way. If it's a 7-way it will look like the second picture with the 6 "blades"…

Starting with the trailer hitch, the Draw-Tite Max-Frame Trailer Hitch Receiver #75236 referenced in your question will indeed fit your 2011 Toyota Tacoma PreRunner and is the exact hitch I would recommend. This Class III trailer hitch will use…

If you are just looking to tow a trailer with lights and without brakes, I recommend the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector part #C56349. This will give you a 4-Pole flat on the back of the Tacoma to tow a…

The bumper does not need to be removed when installing the Curt Trailer Hitch Receiver - Custom Fit - Class III part #13323 on a 2009 Toyota Tacoma, but three of the bolts that hold the bumper in place will need to be loosened and two will need to be…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

The best hitch for your 2023 Honda Passport is going to be the Curt Hitch item #C13421. This hitch is custom fit and bolts to your Honda with included hardware. I really like the Curt hitch because it tucks up underneath your rear bumper cover nicely…

Curt trailer wiring harness #C56513 plugs in line with the tail light wiring on your 2007 Toyota Tacoma. We do not currently have a video of this particular harness being installed but I have included a link to the installation instructions. The…

I can tell you how to determine that but we don't have any way of knowing the axle diameter on your Flagstaff trailer to know if the Dexter Trailer Springs Over-Under Conversion Kit #K71-384-00 is right for you. All you need to do though is…

Yes, you can install a 7-way trailer connector on your 2009 Toyota Tacoma. There's a couple of options depending on your trailer. First you're going to need to start with a 4-way flat connector like you've already found. I suggest the…