Roadmaster Rear Anti-Sway Bar Polyurethane Bushing Kit Installation - 2015 Ford F-53 Video

We do have replacement bushing and mount kits that fit your 2007 Fleetwood Bounder 33R for the rear sway bar but it depends on what the diameter of your factory bar is. If the diameter is 1-3/8 inch you'd want the part #RM-4139-300 or if…

In order to determine the correct rear sway bar for your 2017 Thor ACE 30.2 on a Ford F-53 chassis, you will need to take a look at the rear shock mounts. If the rear shock mounts have two holes and are parallel to the ground (see photo) then you…

The torque spec for the rear U bolts on your 2019 F53 motorhome are dependent on the size. If you have 3/4 x 16 u bolts (and used a 1 1/8" socket to remove the nuts) then they torque to 250 lb-ft. If the u bolts are 7/8 x 14 (and you used a…

The stock rear bar of your 2014 Winnebago Vista built on a Ford 22k chassis has a 1-3/8inch diameter which we have a kit for all new brackets and bushings with the part #RM-4139-300.

You are about to experience a much more pleasant drive with your 2009 Winnebago Vista 30B because we have the exact parts you are looking for. The sway bars and steering stabilizer that fit your rig, which was built on a Ford F-53 chassis, are: -…

On your 2017 Fleetwood Bounder, the Roadmaster Rear Anti-Sway Bar for Motor Homes, #RM-1139-143 is not a confirmed fit. You would want to instead use #RM-1139-149 I reached out to my contact at Roadmaster for you and their suggested installation time…

For your 2019 Tiffin Open Road 34PA built on a 26k GVWR Ford F-53 chassis the correct rear sway bar is the part #RM-1139-149. I also attached an install video link for this for you to check out as well. If you ever decide to replace the front bar…

The 2005 Coachmen Mirada 300QB is on a Ford F-53 chassis which means the correct parts are as follows: Front - SumoSprings Rebel Custom Helper Springs part #SSF-171-40-2 Rear - SumoSprings Maxim Custom Helper Springs part #SSR-184-40-1 Rear-…

I spoke with my contact at Roadmaster regarding any torque specs when installing the Bushing Kit #RM-4139-300 that you referenced. He said that for the bushings themselves there isn't a recommended torque spec because you really just want to…

You could technically use the NOCO Genius Smart Battery Charger #329-GENIUS2D for the battery bank on your RV but I recommend using a 2-bank charger like the NOCO Genius Multi-Bank #NOC24FR instead. Reason being that sometimes more cost-effective…

We recommend at minimum a 14-gauge wire for providing 12V charging power to a towed vehicle's battery, such as that included in the Roadmaster Battery Charge Line Kit for Towed Vehicles, item #RM-156-25. Naturally, a heavier-gauge wire would do…

For jounce-style suspension enhancement on your 2015 Thor Windsport 34E Motorhome I recommend going with the Timbren options because SuperSprings doesn't have a fit for your motorhome. SumoSprings and Timbrens are essentially the same thing - the…