Optronics Sealed Rectangular LED Identification Trailer Light Installation Video

There are a couple of ways to mount the Kodiak Tee Fitting for Hydraulic Brake Hose - Brass - 3/16" Female Inverted Flares #BH-T-3FIF. Many will use brake line mounting hardware on either side of the brake line which will provide enough…

The majority of brake line installations we do in our shop match the first method you have in the photo, labeled "Branch". We also prefer to use rubber hoses as they are easier to work with and there won't be an issue if you end up with…

I was able to confirm with my contact at Optronics that the mounting post on the #MCL95AB is stainless steel, but the mounting hardware is not.

To get the best braking power for your boat trailer you would want to have disc brakes on both axles. If you happen to be limited to one axle then you would want the rear outfitted. With a 5,000lb boat you likely have two 3,500lb torsion axles. The…

Thank you for reaching out and for the photos! From what I'm seeing it looks like the replacement red light #AL82RB. This LED light that measures 2-1/2" long x 1-3/16" tall x 7/8" deep and installs on a base like what you have in…

Yes, because it is a 3-wire light, you can wire the Red Identification Light Bar with White LED Utility Light #OPT88FR to function as rear marker and reverse lights.

I spoke with my contact at Hopkins and he said on the Hopkins Trailer Break-Away Kit with Charger, part #HM20001, it is a gel cell battery so it can be mounted on its side. I am including a link to a FAQ page on trailer breakaway systems and a video…

The white wire is the ground wire of the breakaway kits like part #2028 that you referenced. When it is connected it is completing the circuit for the battery to the trailer wiring. The problem you are having would indicate that there is a circuit on…

Some different brand names of trailer breakaway kits do originate from a common source, and this is also true for items like jacks, landing gear and steps. There really is not a lot to distinguish one from another, since their component parts are…

The auxiliary or back-up wire on a 7-way trailer connector like #HM20041, is used to power to things like interior trailer lights or other 12V accessories. It can also be used to power backup lights, but not many trailers are equipped with those.…

Unfortunately not all trailer manufacturers will use a standard wiring color code but we still can help you determine what to do with the wires of your trailer. First we need to identify what all of the functions of your wires are. To do this…

On the Wishbone 4-Way Trailer Wiring Harness #A35W42B each wire is 20 gauge. It doesn't seem like much but it is more than enough for basic trailer light functions (stop, tail, turn, and running lights). I have linked a video featuring this…