Kuat TRIO Roof Bike Rack Review - 2013 Mazda 3 Video

There is a trailer hitch receiver that will fit a 2021 Mazda3 (both the sedan and hatchback), though a hitch from a 2010 won't be able to be transferred. The reason for that is the Mazda3 underwent a design change for the 2019 model year, so…

For the 2022 Mazda 3 hatchback we have the Curt hitch part #C98BR as a confirmed fit. The part #24982 only fits the sedan models.

The Draw-Tite Sportframe Trailer Hitch Receiver part #24982 is an excellent option for a 2022 Mazda 3 (Sedan) and it comes with all the hardware you need to install. It will work great for hitch mounted accessories like a bike rack. The bike rack…

For your 2021 Mazda 3 there is actually only the one option, the Curt #C98BR which is a Class I trailer hitch with a 1-1/4" receiver; the tongue weight rating is for 200 lbs. Although this has a towing weight rating of 2,000 lbs, it should…

Seeing as how that camera is mounted right above the license plate of the 2023 Mazda 3 it is not going to work well with any bike rack. The Kuat Transfer V2 item #KU74FR will work better than most bike racks when folded up because of the large…

Sounds like you have attempted to install a Class II bike rack in a Class I hitch. This is a common issue. The Class I hitches have a weld stop installed in them to prevent this so that you don't overload the hitch and damage it. Check the hitch…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

Based on my research, the Trailer Hub and Drum Assembly - 8,000-lb E-Z Lube Axles #AKHD-865-8-EZ-K will be a replacement for the 90865 Rockwell hub and drum. Both of these hub and drum assemblies are 12-1/4" diameter, have an 8,000 lb capacity,…

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…