K-Source Snap and Zap Custom Towing Mirrors Installation - 2019 Ford F-150 Video

This is a common issue for installing a brake controller in the 2019 Ford F-150 and the easy solution is to install the part #BRK-ELECKIT which bypasses the very mysterious brake controller power wire issue your truck has and allows your brake…

I looked up pictures of the chrome mirrors of your 2018 Ford F 150 King Ranch and they are the same shape as the mirror the part #KS81850 is designed to fit so this would be a great option that would work well for you.

The K-Source Towing Mirrors part #KS81850 that you referenced are a confirmed fit for your 2018 Ford F-150 Lariat and will allow the power fold function to still work as well as the auto adjust.

The chrome caps on your mirror should not effect the fit of the K-source part #KS81850. There are pads on the inside of the mirror housing to prevent any scratches or abrasions on the factory mirror. I recommend the K-source mirrors for your F-150. I…

The best option we have for your trailer would be the Taskmaster part #TR20514 which is a ST205/75R14 like what you have in a Load Range C. Going with a higher capacity tire when not needed really won't gain you anything, but this tire has a…

Normally a bumper is rated at about 3500 lbs towing capacity. It is usually stamped somewhere on the bumper or possibly on a sticker. A frame mounted hitch is going to have more capacity for towing due to how it is installed. Also, most trailers will…

When towing a trailer, the vehicle will be working twice as hard as opposed to normal driving conditions and even more so when climbing a hill. The added workload is going to cause a buildup of heat which would affect both performance and wear lift.…

The sandwich adapter of the Derale Combination Transmission and Engine Oil Cooler with Multiple Threads #D15902 does have a thermostat built into it so that it allows the engine oil to warm up before sending it through the cooler. This will work well…

The best way to determine which line on a transmission cooler is the return line from the radiator is to use the following procedure: 1. Start engine while engine is cold 2. Place transmission shift lever in drive for no more than 10 seconds 3. Place…

Utilizing wheel chocks like the Anderson Tuff Chock #3605 wouldn't be ideal for the angle you are stating. Of course the weight of the boat is likely not distributed evenly over the axle, there are some chocks I believe would work for the…

Scissor jacks on trailers can be used as levelers or stabilizers. They are just not meant to lift up the weight of the trailer so that would limit the amount of leveling they can do. I recommend also using leveling blocks #UF48-979051, or the ones…

The Club Tire Claw XL Wheel Lock #WI491KA-491LNP is for security and while it technically can stop your wheels from rotating it is not meant to stabilize a trailer to keep it from moving. What you would want instead is a wheel chock such as FloTool…