Curt Echo Mobile Trailer Brake Controller Installation - 2019 Ford F-150 Video

Yes, your smart phone can be used like normal to place calls and take pictures when also using the Curt Echo part #C51180. The brake controller app would basically just keep working in the background when doing so.

I have some great news for you, which is that the Curt Echo Mobile Trailer Brake Controller #C51180 does not need constant service to work. The Echo does require an internet connection in order to be set up but if you do lose connectivity you will…

This is a common issue for installing a brake controller in the 2019 Ford F-150 and the easy solution is to install the part #BRK-ELECKIT which bypasses the very mysterious brake controller power wire issue your truck has and allows your brake…

I spoke with my contact at Tekonsha and the problem that you are experiencing is most likely caused by faulty wiring on your trailer. The (discontinued) Tekonsha Prodigy RF 90250 works by activating the brakes when there is a signal on both the…

A factory 7-way trailer connector isn't all you need to power a trailer's electric brakes. You still need a brake controller. Some Ford F-150s are equipped with a factory integrated brake controller, which you may have. If your 2012 Ford…

I have a few things for you to check when it comes to not being able to pair your iPhone with the Curt Echo #C51180. The first thing to do is make sure that you're pairing your phone with the Echo through the app. If you paired it through the…

To add a 7-way, you can use part #118283, and plug it inline at the connection between your existing 4 pole and the factory wiring harness. To install the Tekonsha P3 #90195 brake controller, all you'll need is the #22292 wiring adapter to…

I'll start by saying that it doesn't appear that this would be related to a fuse, since these trucks don't have dedicated towing fuses on them. I would need to know how you're testing this and if you've tested with a trailer…

The Curt Echo Wireless Trailer Brake Controller #C51180 is a little complicated to use on the 2018+ Ford F-150's. To get the Echo to connect you will need to ensure that your 2020 Ford F-150 is in tow/haul mode. Then the truck is going to need to…

The factory brake controller plug should be located under the dash to the right of the steering column. It should be located towards the center of the dash and may be tucked up and out of the way behind some wiring. I have linked an FAQ Article that…

Curt has a recommended setup procedure outlined for the Curt Echo part #C51180 that is outlined in their install instructions for this controller but since not all trailer brakes apply the same way there isn't a standard setting you can use that…

The Curt Echo Trailer Brake Controller #C51180 is quickly becoming one of our most popular units in part because of exactly what you mentioned in your question. Its simple installation process of plugging right into a tow vehicle 7-Way and pairing…