Fastway e2 Weight Distribution System Installation - 2018 Honda Odyssey Video

The Curt MV Weight Distribution System part #C17050 does not have sway control so reversing is not as big of an issue although the trailer still needs to remain relative straight. If you need to turn and backup it is recommend to unhook the spring…

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion…

I spoke with Hidden Hitch and you are correct:Hidden Hitch part #70737 was obsoleted in 2009 and replaced with Draw-Tite part #75270. Draw-Tite part #75270 is form/fit/functionally the same as part #70737. There are a few aesthetic differences…

To install a 7-Way harness on your 2024 Toyota Grand Highlander you will need two separate wiring harnesses because they don't make just one that'll do the job. The first harness you'll need is either the Curt T-One Vehicle Wiring Harness…

Thanks!! I am posting them on this page to help future customers with a Pathfinder like your 2017!

You may have found the wrong connector on your 2013 Nissan Pathfinder to install the Tekonsha Plug-In Wiring Adapter #3050-P. The harness is located underneath the dash, to the left of the steering column, taped to another harness near the emergency…

For your Magic Tilt Boat Trailer you will need a Blue Ox Pole Tongue Weight Distributing Hitch Adapter #BXW4023. This will bolt around the Pole frame with a width of 2-3/4" to 4-1/2" and height of 3" to 6". It will then allow you…

The difference between the two system is the spring bar design. The part #FA92-00-0600 has a square bar "trunnion" spring bar and the part #FA94-00-0600 uses round bars. Trunnions are preferred as they offer better ground clearance and are…

To tow your 2014 Coachmen Clipper BH, you will need a Hitch #75270, Weight Distribution System #FA94-00-0600 and a Brake Controller #90885 to power your Clipper's Electric Drum Brakes. I recommend the Draw-Tite Hitch #75270 for your 2016 Honda…

I have exactly what you need to add a 7-way trailer connector to a 2016 Honda Odyssey. For this, you'll need to start with a 4-way trailer connector and I recommend the T-One Vehicle Wiring Harness part #118521 which is plug-n-play. Then you can…

What you need for your boat trailer is a pole tongue adapter like part #RP58393. This product is designed to work on trailers with straight tongues just like your boat trailer. I attached a picture of what it looks like installed. The best way to…

I contacted Venture Trailers Inc. and found that the reason they do not recommend the use of a weight distribution system is because most weight distribution systems are not recommended for trailers with surge brakes because they do not allow the…