Fastway e2 Weight Distribution Installation - 2018 GMC Sierra 3500 Video

The K-Source Snap & Zap Custom Towing Mirrors #KS80930 I feel are the best mirrors extensions for your 2024 GMC Sierra 1500. These have all the cut outs for turn signals, puddle lights and cameras you may have on your mirrors. The snap on…

You will want to use the Fastway e2 Weight Distribution #FA92-00-0600 for your trailer. This system is rated for a trailer up to 6,000lbs with a tongue weight of 200-600lbs. The e2 #FA94-00-1061 you found is rated for trailers up to 10,000lbs with…

You are correct. You will want to use the backing plate to sandwich the boards and provide the most secure connection when installing the Brophy Swiveling D-Ring Anchors #RR6K-4 . You can mount these in a recessed hole created by a router or punch…

The Brophy D-Ring Tie Down Anchor w Backing Plate - Bolt-On - 1/2" Wide - Recessed - 1,600 lbs #RR5K are rated for 5,000 lbs break strength and will work just fine with your application. The 3/4 inch plywood floor is very strong and with…

Thank you for the kind words, the K-Source Snap & Zap Custom Towing Mirrors #KS80930 are confirmed to fit all models of the 2021 GMC Sierra 1500, that would include the Denali. The mirrors have a cut out in the bottom that fit around the…

Yes, we do have towing mirrors for a 2022 Chevrolet Silverado. I recommend the K-Source Snap & Zap Custom Towing Mirrors - Snap On - Driver and Passenger Side item #KS80930. I personally drive a Silverado and I think some of the towing…

90-120 ft lbs of torque is probably about right for your 15 inch trailer rims. If you check out the lug nut torque chart that I attached you will see that nearly all of the torque specs are that and higher. You'll need to know the diameter of…

It looks to me that you will want additional spacers to provide better weight distribution on your 2019 Ram 1500. The Fast Way e2 Weight-Distribution Hitch #FA94-00-1061 is capable of having up to 9 spacers to provide the correct pinion angle on…

Yep! The 1-7/8" 12pt Thin Walled Socket #ALL643216 does work with the e2 Fastway round bar weight distribution systems. This socket costs considerably less than the Equal-i-zer socket and works just as well so it's what we normally…

Part #EQ70-00-4800 is a 1-7/8 inch socket with an outer diameter of around 2-3/8 inches.

To install a ball, like the Equal-i-zer #EQ91-00-6080, you will need a 1 7/8 inch socket that uses a 3/4 inch drive. The Equal-i-zer Thin Walled Socket #EQ70-00-4800 is ideally suited for this application. The torque rating on the ball will also be…

The distance between the center of hitch ball hole to the center of the mounting holes for the shank of the #FA94-02-1055 measures 4 inches.