Install Instructions For etrailer Hitch e98903 For 2020 Chrysler Pacifica Hybrid

Question

Question:

I am installing the etrailer hitch on a 2020 Chrysler pacifica. Is there a video for the install? what does underbody panel must be trimmed mean

asked by: Troy

0

Expert Reply:

I have attached a video of the etrailer.com Trailer Hitch Receiver part # e98903 installed on the 2020 Chrysler Pacifica. We do have a video of an install on a 2018 which would be the same as your 2020 Chrysler Pacifica. The underbody panel does need a 0.5"x10" slot trimmed into it. The heat shield needs a 5"x13" rectangle cut out from it as well. I have attached cut out dimensions for both pieces from the instructions.

expert reply by: Heather A

0

click to enlarge

Answer 1

I checked with the trailer hitch manufacturers and can confirm there is one trailer hitch that is a fit for the 2021 Chrysler Pacifca, which is from Curt: - Curt Trailer Hitch Receiver #C29UR This hitch (which does fit the 2020 model as well) has a…

view full answer...

Answer 2

The etrailer brand #e98903 class III hitch fits all models of the 2022 Chrysler Pacifica, including the Hybrid model. If you click the provided link, you can take a look at an install video. I've also linked you to the installation instructions.…

view full answer...

Answer 3

The etrailer.com hitch part #e98903 is a confirmed fit for your 2020 Chrysler Pacifica Hybrid and does have a couple extra steps for the hybrid models. There's an emissions canister that needs to be relocated temporarily when installing the hitch…

view full answer...

Answer 4

There is a small difference in installing the etrailer.com Trailer Hitch Receiver part #e98903 on a Hybrid compared to a non-hybrid 2021 Chrysler Pacifica. There is an emissions canister on the driver side frame rail that needs to be relocated…

view full answer...

Answer 5

The etrailer hitch part #e98903 does fit the 2021 Chrysler Pacifica Hybrid. It's listed in two places in our fitguide as fitting the hybrid and non-hybrid models.

view full answer...

Answer 6

In order to tow a trailer with your 2017 Chrysler Pacifica you will need a trailer hitch, wiring harness, and ball mount/hitch ball combo. Based on my research the factory tow package can vary a bit depending on what "group" is selected but…

view full answer...

Answer 7

The etrailer hitch #e98903 is a confirmed fit on the 2018 Chrysler Pacifica Hybrid and it also fits the standard version. The instructions for this hitch have been sent to you in a separate link. They will be essentially identical to the instructions…

view full answer...

Answer 8

The installation of the etrailer.com Trailer Hitch Receiver #e98903 will be the same as the Curt Trailer Hitch Receiver #C13383 for your 2019 Chrysler Pacifica Hybrid and I have attached the installation instructions of the Curt hitch for you so you…

view full answer...

Answer 9

For your 2021 Chrysler Pacifica Hybrid, I recommend the Curt Trailer Hitch Receiver #C29UR. Reason being, is because this is the only class III hitch that fits the Hybrid model. The class III is the better choice over a class II or class I because…

view full answer...

Answer 10

When the etrailer hitch part #e98903 was installed here we found that it measured 5 inches from the center of the hitch pin hole out to the rear bumper edge. Since that's not enough clearance for the Inno #INH540 and none of our other hitches…

view full answer...

Answer 11

The etrailer Trailer Hitch Receiver part #e98903 is an excellent option for a 2020 Chrysler Pacifica Hybrid. The ground clearance will vary by vehicle but when we installed this on a 2020 Hybrid the distance from the ground to the top inside edge of…

view full answer...

Answer 12

Good news! We actually have several options for trailer hitches and hanging bike racks for your 2019 Chrysler Pacifica Hybrid. The manufacturer may not have the vehicle rated for towing, but you will be able to install a hitch like the #e98903 in…

view full answer...