Draw-Tite 7-Way Pre-Wired Car Connector Installation - 1996 Ford F-250 and F-350 Video

There's only one way to install a 7-way on your 2014 Nissan NV 2500 and it involves installing a 4-way first like with the Curt part #C56148 which is by far the best option that is the most reliable. And then to convert it to a 7-way and install…

You are exactly right. To use the Bulletproof ball mount #BPH64FR in the rise position you simply flip it over. The picture below will show you an example of the ball mount in the rise position.

I reached out to my contact at Curt and he said for your 1996 Ford F-150 the Curt Trailer Hitch Receiver #C13902 would require some pretty significant modifications on the truck for installation. Even when considering that the actual custom-fit…

The B and W Hitch part #BWHDRH25122 would fit your 1995 Chevy Silverado 3500 if it was built on a cab and chassis model. Which easy way to determine this is to measure the truck frame from outside to outside. If this measurement is 34 inches then you…

I spoke with my contact at B and W and he informed me that the center section of the B and W Hitch part #BWHDRH25124 measures 31-13/16 inches long measured from outside of flange to outside of flange.

I went out to the warehouse to measure the B&W Heavy-Duty Trailer Hitch Receiver #BWHDRH25132 for you. The inside bracket measurement is 33-3/16 inches. The outside bracket measurement is 37-11/16 inches. I've attached a photo to assist.

We offer several classes of hitch receiver for the 1996 F-350 and the particular version of the truck you have will determine what options will work for you. With the link provided you can use the drop-down menu at the top of the page (Select Vehicle…

From the top of the mounting plates to the top of the B&W Heavy-Duty Trailer Hitch Receiver #BWHDRH25124 receiver is a 5-1/4" drop and then from the rearmost bolt hole to the end of the receiver is 10-7/8" (see attached).

The mounting holes the Curt Trailer Hitch Receiver #14053 measure 38-1/4" and 38-3/4" width-wise and then from the center of the of the forwardmost to the rearmost is 13-1/4". Attached is a dimensional photo for you to reference. This…

The #BWHDRH25122 measures 5 inches from the frame to the top of the hitch receiver. The #BWHDRH25198 measures 7-3/8 inches from the frame to the top of the receiver.

I am unfamiliar with the Barden Bumper and in my research, I could not find any specific information regarding the Barden Bumper. Our trailer hitches are not tested with aftermarket bumpers. We have two bumpers that have been determined to be a fit…

The B&W Heavy-Duty Trailer Hitch Receiver #BWHDRH25122 that will fit your 1986 Chevy K20 will measure 5.438" from the top of the frame brackets to the top of the receiver. If this is looking like it will not be enough to clear the bottom of…