Dexter E-Z Flex Suspension Kit Installation - 2017 Grand Design Reflection Travel Trailer Video

There is no functional difference between the older gold and the current red versions of the Dexter EZ Flex Equalizers part #K71-652-00. They just decided to powder coat them red recently.

I would be happy to compare the Road Armor, Dexter E-Z Flex, and MORryde equalizers you were looking at for your Jayco Eagle 325BHS. First things first each of these kits are designed to replace equalizers that measures roughly 6" between the…

It is likely you can avoid the drain line when installing the MORryde X-Factor Crossmember for Standard Frame Hangers #MR33WR by using the MORryde X-Factor Crossmember Adapter Kit for Drop Down Applications #MR43WR. I don't know exactly the…

Both the Equa-Flex Cushioned Equalizers - Double Eye Springs like #LC279687 and the E-Z Flex Heavy Duty Rubber Suspension System like the #K71-653-00 will provide an upgrade over the standard cast equalizers that most likely came on your trailer.…

The TrailerLegs Tire Saver Stands #326-TRLLG-4 are perfectly safe for your axles and will not cause any damage whatsoever. Axles are designed to bear the weight of a trailer and using the TrailerLegs does not affect their capacity or ability to do…

The Dexter E-Z Flex cushioned equalizers for trailer suspensions can be used to replace the similar Lippert Equa-Flex units on your toy hauler. You will want to match up the units' dimensions to ensure the suspension operates as it should with…

Yes you are correct in your assumption. On the Optronics Thinline LED #STL64RB, the Red wire is for turn signal, so this will go either the green or yellow wire on your trailer. The black wire is tail lights so this would go to the brown wire on your…

I recommend the Dexter E-Z Flex Suspension Kit #K71-653-00 to upgrade your Curved Equalizer EQ-E34 #TREQE34. The Dexter kit includes new equalizers, wet bolts and shackle straps to quiet your trailer suspension and minimize road shock that is…

Yes, it is. However since you have a 35" wheelbase you're going to want the MORryde Shock Absorbing Suspension Equalizers item #MR27ZR. These are specifically designed for trailers with a 35" wheelbase. They are made for 8,000 lbs axles…

I have checked the installation instructions for the Dexter Trailer Springs Over-Under Conversion Kit #K71-385-00, and according to Dexter they strongly recommend tack welding the spring seats in place. Please note that this kit is intended for use…

You're not going to have any problems mixing Dexter and Lippert components on trailer axles over 10k-lbs in the same manner as below 10k-lbs as long as the measurements on the replacement parts are the same- i.e. bearing sizes are the same, etc..…

Both the MORryde Rubber Equalizers #MR87ZR and Dexter E-Z Flex Suspension Kit #K71-652-00 are achieving the same result. They are doing so with slightly different designs but end up with the same result. I recommend using the Dexter E-Z Flex…