Performance Tool 2 Ton Floor Jack with Stands Review Video

There is no functional difference between the older gold and the current red versions of the Dexter EZ Flex Equalizers part #K71-652-00. They just decided to powder coat them red recently.

Both the Equa-Flex Cushioned Equalizers - Double Eye Springs like #LC279687 and the E-Z Flex Heavy Duty Rubber Suspension System like the #K71-653-00 will provide an upgrade over the standard cast equalizers that most likely came on your trailer.…

I would be happy to compare the Road Armor, Dexter E-Z Flex, and MORryde equalizers you were looking at for your Jayco Eagle 325BHS. First things first each of these kits are designed to replace equalizers that measures roughly 6" between the…

The TrailerLegs Tire Saver Stands #326-TRLLG-4 are perfectly safe for your axles and will not cause any damage whatsoever. Axles are designed to bear the weight of a trailer and using the TrailerLegs does not affect their capacity or ability to do…

It sounds like you have a single axle trailer and are curious about whether or not to put the hanger like the part #28-5 or a shackle in front on the trailer frame. We recommend you put the hanger in the front. The force from the bumps in the road…

The trailer jack would hold the front of the trailer and then the two stands of the 4,000 lb Floor Jack with Stands #PTW1605 would hold the other end of the trailer and keep it stable from left to right. You would not need a second set of stands.

Care should be taken when loading grease into a hub that is installed on an EZ-Lube spindle. It is very easy to over-fill the hub and apply too much pressure and blow out the grease seals. Even the double-lip seals like #34823 used with EZ-Lube hubs…

If you raise your trailer for storage during the winter months then you want to place the jacks stands just in front of the front leaf spring hanger. The 2-Ton Floor Jack with Stands #PTW1605 would be a great option to do this. To keep your trailer…

There are a couple of things that you can do to get more ground clearance for your new trailer. First, if the leaf spring stack is attached under the axle then you could use an over/under conversion kit. If the trailer has a 2-3/8 inch diameter round…

You can raise your trailer about 2 more inches using the Correct Track Trailer Alignment and 2" Lift Kit - Single Axle #LC87120. Then you can also add longer hangers if you prefer. We do have long hangers like #115919 which are the longest…

Yes, a trailer that is nose up can cause big problems. A level trailer is ideal and worth working toward for safety. The good news is that you can get the trailer almost exactly level with switching ball mounts. This is where an adjustable ball mount…

The only option we would have would be to install taller suspension hangers on your trailer. You would first need to measure the height of your current hangers and then check out the link I attached which has all the hangers we carry. You will then…