Curt Trailer Hitch Installation - 2020 Mazda CX-9 Video

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

Both of the 2 inch hitches we offer for your 2018 Mazda CX-9 will have their hitch opening below the rear bumper of the vehicle. The better option is the Draw Tite part #76020 over the Curt part #C13284 as the Draw Tite has a better price, slightly…

You are right that there is a small trim panel underneath your 2019 Mazda CX-9 that does need to be removed when installing either the Draw-Tite Trailer Hitch Receiver #76020 or Curt Trailer Hitch Receiver #C13284. Doing this is not difficult at all…

There is indeed a trailer hitch with a 2 inch receiver that fits your 2022 Mazda CX-9. It is from Curt, and I verified with them that the hitch is a fit for your '22; the correct part is the following: - Curt Trailer Hitch Receiver #C13284 The…

If you order the Curt hitch part #C18152 from us you'll get a new hitch cargo carrier. If you wanted to buy one of the used ones we had available you'd have to order a totally different part number that changes as the availability changes. I…

The best trailer hitch we offer for a 2019 Mazda CX-9 to use with a bike rack is the Curt Trailer Hitch Receiver part #C13284 because the receiver tube is closer to the edge of the bumper than other options which allows for more clearance with a bike…

The Curt hitch part #C13284 has the best clearance for a bike rack to fit past the rear bumper. It has 5 inches from it's pin hole out to the furthest edge of the rear bumper whereas the Draw Tite #76020 has 7 inches.

You will still be able to use the hands free lift gate feature on your 2021 Mazda CX-9 with the Curt Trailer Hitch Receiver #C13284 installed, but you will need to put your foot on either side of the receiver and move it in and out until you find the…

It looks like the second generation for the Mazda CX-9 began in 2016 and continues through the current model. The changes to the rear frame and bumper on the new generation were enough to require a new trailer hitch for it to fit properly. As you…

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

The Draw-Tite Max-Frame Trailer Hitch Receiver #76020 will be tightly bolted to the chassis on your 2021 Mazda CX-9. There is no need for any type of insulating material to go between the receiver and the frame connections. I have not seen any…

The Curt Trailer Hitch Receiver part #C13284 which is a fit for a 2020 Mazda CX-9 will work on models with the hands free lift gate feature. That said, you will need to place your foot on either side of the receiver tube in order to activate it but…