Curt Trailer Hitch Installation - 2019 Ford Ranger Video

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

Most likely the stereo is fried since there isn't a fuse in this one like most other stereo systems. What you can do though is pull off the trim around it to get to the mounting screws and remove it from the cabinet. If you have done this…

As far as the necessary mounting size hole and the features provided, the Jensen #JWM60A RV Stereo you'd looked at would be the best replacement. The stereo has an AM/FM tuner, can play DVDs or CDs, is Bluetooth compatible and has aux and USB…

The Furrion RV Stereo, #DV1230BL is a good option as a replacement for your current DV1200 and a rather straight forward installation. It is not however a direct plug-in installation. This has a subwoofer terminal and will fit in a cut out that is…

There is not any added hardware required to install the Curt hitch that fits your 2022 Ford Ranger, which is the following part number: - Curt Trailer Hitch Receiver #C13417 Installation of the #C13417 on a '22 Ranger just requires removing the…

To remove the hinge pin you'll need to remove the Phillips screw from each side of the cover. Then the lift arm supports can be disconnected from the lid, and the new lid can be put in place. You just want to make sure to replace all the hardware…

Good question, and thanks for the photo. I verified for you that the chain hooks on your 2022 Ford Ranger do NOT have to be removed in order to install the Curt hitch that fits, which is the following part number: - Curt Trailer Hitch Receiver…

It is possible to have both a 7-way and 4-way on your 2019 Ford Ranger by using the #C56431 but you will need to replace the 7-way connector with the #C55774 and you'd have one that has both. This uses the same round connector as what comes with…

There are both Class I and Class III trailer hitches available that are confirmed to fit your 2010 Honda CR-V. The available Class I hitches, such as the Draw-Tite Sport Frame #24792, feature a square tube design, while the Class III hitches like the…

Based on the picture you provided the OEM 7-way/4-way connector for your 2021 Ford Ranger uses the standard connector as the Curt T-Connector Vehicle Wiring Harness with 7-Way Trailer Connector #C56431 you were looking at. We actually offer the same…

Yes. The Curt #C56431 tees into the existing factory wiring and will leave your factory 4 way connected, so you'll still have the ability to use that for towing as well. I've linked the installation video of this harness for you to have a…

To add a 7-way connector to your 2023 Ford Ranger you will want the Curt T-Connector Vehicle Wiring Harness with 7-Way Trailer Connector item #C56431. This custom-fit T-connector plugs into your Ranger's wiring harness, which is located behind…