Do Chain Hooks on 2022 Ford Ranger Have to be Removed to Install Curt Trailer Hitch Receiver

Question

Question:

Do I have to remove the chain clips on the underside of my bumper to install the Curt tow bar? See pics

asked by: Tom H

1

Helpful Expert Reply:

Good question, and thanks for the photo. I verified for you that the chain hooks on your 2022 Ford Ranger do NOT have to be removed in order to install the Curt hitch that fits, which is the following part number:

- Curt Trailer Hitch Receiver # C13417

The hitch will fit under the chain hooks, and the receiver between them; I have added a photo a customer sent in of the # C13417 installed on their Ranger with the tow hooks so you can see how it will look when installed on your truck.

expert reply by: Kyle S

1

Curt Trailer Hitch Installed on Ford Ranger With Chain Hooks
(click to enlarge)

Chain Hooks on 2022 Ford Ranger
(click to enlarge)

Answer 1

There is not any added hardware required to install the Curt hitch that fits your 2022 Ford Ranger, which is the following part number: - Curt Trailer Hitch Receiver #C13417 Installation of the #C13417 on a '22 Ranger just requires removing the…

view full answer...

Answer 2

As long as a qualified welder is used, a Safety Chain Attachment Loop like part #E950 could be welded to the receiver as shown in the photo I provided. Having an amateur welder weld it could result in the hitch being weakened. This would be the best…

view full answer...

Answer 3

To add a 7-way connector to your 2023 Ford Ranger you will want the Curt T-Connector Vehicle Wiring Harness with 7-Way Trailer Connector item #C56431. This custom-fit T-connector plugs into your Ranger's wiring harness, which is located behind…

view full answer...

Answer 4

There are a few differences to consider between the Curt Hitch #C13417 and the Draw-Tite #DT73GR. First off, the Curt has a maximum tongue weight capacity of 900 pounds/maximum tow capacity of 6,000 pounds while the Draw-Tite has a maximum tongue…

view full answer...

Answer 5

Yes, there is a large difference in weight capacities between those hitch receivers for your 2021 Ford Ranger. I would be happy to break them down and compare them for you. The Curt Trailer Hitch Receiver item #C13417 is a custom fit for Ford Rangers…

view full answer...

Answer 6

Yes, there is another option to add a brake controller to your Ranger. Since you have the factory tow package, I recommend the Curt Echo In-Line Wireless Brake Controller item #C79DR. The controller plugs in behind your 7-way with included…

view full answer...

Answer 7

It is possible to have both a 7-way and 4-way on your 2019 Ford Ranger by using the #C56431 but you will need to replace the 7-way connector with the #C55774 and you'd have one that has both. This uses the same round connector as what comes with…

view full answer...

Answer 8

Per the instructions for the Curt Trailer Hitch Receiver #C13417, you will need a 21mm socket for this install as well as a 6" extension. Included are the full instructions that should help get you started.

view full answer...

Answer 9

The etrailer and Curt trailer hitches that fit your 2020 Ford Ranger are very similar, with the biggest difference being their finishes. The etrailer Trailer Hitch #e63ZR has a black matte finish and the Curt Trailer Hitch #C13417 has the traditional…

view full answer...

Answer 10

In order to obtain replacement hardware for the Curt Trailer Hitch Receiver part #C13417 which is a fit for a 2022 Ford Ranger you'll simply need to obtain the Replacement Hitch Hardware Kit part #RHK.

view full answer...

Answer 11

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 12

You are not necessarily incorrect about your 2021 Ford Ranger being limited to 3,500 pounds, but there is a caveat to this. The 3,500 pound tow rated is only when you are using the bumper as a hitch. I included a picture showing what I mean by that…

view full answer...

Do Chain Hooks on 2022 Ford Ranger Have to be Removed to Install Curt Trailer Hitch Receiver

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching