7-Way and 4-Way Trailer Wiring for Rear of 2019 Ford Ranger

Question

Question:

I have a 2019 Ford Ranger XLT Sport without a tow package which is why im looking at this item. Does this harness retain the use of the factory 4-pin as well or will an adapter be needed for the 7-pin connection.

asked by: Adam

0

Expert Reply:

It is possible to have both a 7-way and 4-way on your 2019 Ford Ranger by using the # C56431 but you will need to replace the 7-way connector with the # C55774 and you'd have one that has both. This uses the same round connector as what comes with the # C56431 so it would plug right in.

expert reply by: Jameson C

0

Answer 1

Yes, there is another option to add a brake controller to your Ranger. Since you have the factory tow package, I recommend the Curt Echo In-Line Wireless Brake Controller item #C79DR. The controller plugs in behind your 7-way with included…

view full answer...

Answer 2

There is not any added hardware required to install the Curt hitch that fits your 2022 Ford Ranger, which is the following part number: - Curt Trailer Hitch Receiver #C13417 Installation of the #C13417 on a '22 Ranger just requires removing the…

view full answer...

Answer 3

We do have some trailer hitch and wiring options for your 2019 BMW X3. For a hitch I recommend using the Draw-Tite Class III #76226 as it fits all models of your X3. Then for wiring you'll need the T-One #TK77FR which tees in behind your tail…

view full answer...

Answer 4

The Curt #E-3S bumper hitch isn't a vehicle specific product, it'll fit many different step bumper equipped trucks and SUV's. If your Ranger is equipped with a step bumper with holes spaced as shown in the photo, it'll fit. The hitch…

view full answer...

Answer 5

To add a 7-way connector to your 2023 Ford Ranger you will want the Curt T-Connector Vehicle Wiring Harness with 7-Way Trailer Connector item #C56431. This custom-fit T-connector plugs into your Ranger's wiring harness, which is located behind…

view full answer...

Answer 6

To install the Curt Trailer Hitch Receiver - Custom Fit part #C13417 on the 2020 Ford Ranger you will need a 21 mm socket and a 6" socket extension. You will also need a ratchet, a torque wrench, 2 c-clamps, and safety glasses.

view full answer...

Answer 7

Yes, the Curt 7-way part #C56431 is a confirmed fit for your 2023 Ford Ranger and will work great with your Curt Venturer #C51110.

view full answer...

Answer 8

Since you are not getting the 12V power when your truck is running, you most likely don't have a fuse issue as you stated their isn't a specified fuse or relay in the owners manual. The issue is that your truck is computerized even at the…

view full answer...

Answer 9

To install trailer wiring on your 2020 Ford Ranger I recommend the T-Connector #C56431 which tees into your OEM wiring underneath the vehicle on the driver's side. We actually had the opportunity to install this on a 2020 Ranger and I'm…

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

To use the Curt Echo Wireless Trailer Brake Controller #C51180 on your 2019 Ford Ranger with a factory 4-way connector you will need to install the Tekonsha 7-way connector #22124. This connector includes a harness custom made for your vehicle and…

view full answer...

Answer 12

Yes. The Curt #C56431 tees into the existing factory wiring and will leave your factory 4 way connected, so you'll still have the ability to use that for towing as well. I've linked the installation video of this harness for you to have a…

view full answer...