Customers compare AM30861 to these similar products
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Videos
Help Articles
Expert Answers
A 5.30 X 12C tire is going to be your best replacement. If you need the 4 on 4 inch bolt pattern #AM30780 is a good option, or #AM30820 for the 5 on 4-1/2 inch bolt pattern. These both have the wheel and tire included, which you'll need, since…
view full answer...It looks like your Kenda 5.30-12 Bias Trailer Tire with 12" Galvanized Wheel - 5 on 4-1/2 - Load Range C #AM30850 uses 1/2" lug bolts/nuts. If this is correct, then the correct torque specs would be 75-85 ft.-lb. If you are using something…
view full answer...I did some calculations on the tire sizes and found that the difference between the 175/80R13 and the 155/80R13 is pretty small. The 175/80 is 24 inches inches tall whereas the 155/80 is 22.7 inches tall for a difference of 1.3 inches total, but that…
view full answer...In your situation changing to a higher load range tire will not affect the odds of a puncture (since the ply rating does not actually refer to layers of material in the tire but rather its strength). Moving to a higher load range DOES offer the…
view full answer...The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…
view full answer...Load range B trailer tires are going to have a lower capacity than C load range tires. Basically that, psi rating, and the ply rating are the only differences. A higher load range tire would last a little longer than lower load ranges of the same…
view full answer...The 205/50-10 is the modern replacement size for the 20.5x8-10 tire. The #AM3H454 wheel/tire combo you specified has a 1650 lb per tire capacity. My research indicates that the 20.5x8-10 Load Range F tire had a 1765 lb per tire capacity which is…
view full answer...Since the Loadstar K399 Bias Trailer Tire #AM1HP54 has a load rating "D" and a ply rating of 8, the recommended PSI for the tire is 70.
view full answer...Most trailer tires are rated for 65 miles per hour unless otherwise indicated on the tire. We do have some tires that carry higher ratings. Taskmaster trailer tire #TTWTRTM1758013C is an ST175/80-13 radial trailer tire, load range C, rated for 81…
view full answer...The next size up from a 10" wheel would be a 12" wheel, the closest to a 20.5x8-10 tire would be a 145/80-12. For this, I recommend the Kenda Karrier S-Trail ST145/R12 Radial Tire w/ 12" White Spoke Wheel part #AM31199DX which is a…
view full answer...Wheels fit based on bolt pattern as well as height and width. Your 5.30-12 wheels are 12 inches by 4 inches and upgrading to a 14 inch wheel will come with an increased width of 5.5 or 6 inches to go with the extra 2 inches of height. If you have…
view full answer...Moving up a higher load range will not only increase your load capacity, but will also increase the sidewall ply strength, so you will be less likely to have a blow out. I recommend the Kenda 5.30-12 Bias Trailer Tire with 12" White Wheel - 5 on…
view full answer...