B and W Fifth Wheel Underbed Kit Installation - 2022 Ford F-250 Super Duty Video

Great questions! Reese actually makes the OEM puck system for Ford so if the 2022 F-250 is cheaper by a lot then I recommend going that route and installing the Under-Bed Rail and Installation Kit #RP87FR. The only thing you'll really be missing…

Yes, the B&W Companion #BWRVK3300 fits 2011 and newer Ford Super Duty trucks with factory-installed towing prep package. This will fit the factory puck system in your 2023 Ford F-250.

I have good news, because you do not have to get an entirely new B&W Companion OEM 5th Wheel Hitch for Chevy/GMC Towing Prep Package #BWRVK3710 for your 2020 Chevy Silverado 3500 with the factory puck system. All you need to do is purchase the…

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

The height adjustment procedure for a 5th wheel hitch will be dependent on that particular hitch but most of the options from Reese have the same procedure which entails unbolting the center section, moving the center section up to the next set of…

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

The OEM puck system is optional for Ford pickups so the only way to tell if your 2017 Ford F-250 has the puck system or not is to physically look in the bed for the pucks like what you see in the attached photo. If you do have the puck system then I…

The B and W Gooseneck hitch part #BWGNRK1111 that you referenced has been confirmed as a fit for your 2012 Ford F-250 and will fit with the lift kit you have, but you should note that it will be pretty difficult to tow a trailer level with a truck…

The 1/2 inch bolts that attach the center section of the hitch to the legs should be torqued per the instructions linked below. If you need a torque wrench that covers that spec you can use #ALL944001. Reese M5 5th Wheel Trailer Hitch #RP30928 is…

You will want the hitch to be set at the height that 1) allows the trailer to be level, and 2) allows you a minimum of 6 inches between the bottom of the trailer loft and the top of the bed rails. The fifth wheel hitches offer several inches of up…

There are a few different types of PullRite 5th Wheel Trailer Hitches. We don't carry these so I cannot inform of which you a have but I do know if you have the ISR Series version then you can use the Curt Custom Fifth Wheel Installation Kit for…

The weight capacity of 24,000 pounds would be the most the trailer can weigh. So the gross weight capacity of gooseneck coupler #BWTEXA4200 is 24,000 pounds. The vertical load limit is the amount of weight pushing down on the ball. On a regular hitch…