Will The Truck Trolley Sliding Truck Bed Tray # TR87VR Allow for Generator To Slide In & Out of Bed?

Question

Question:

Does this tray slide at all? Can I put a generator on it and slide it out to easily reach it?

asked by: EthanEtherson

0

Expert Reply:

Yes, the Truck Trolley Sliding Truck Bed Tray # TR87VR does slide out of your truck bed. It has wheels built into the bottom of the tray. This is capable of supporting up to 300lbs and will extend 12-18" beyond your tail gate.

expert reply by: Bud M

0

Answer 1

Truck Trolley test fit the part #TR87VR on the 2023 Ford F-150 and found that it does fit the 5-1/2 foot and 6-1/2 foot beds so it would for sure fit yours. We also had the chance to test fit it on a 2020 model and found that it fit and worked great.…

view full answer...

Answer 2

The Truck Trolley Sliding Truck Bed Tray #TR87VR actually just installs using straps, which is why it has a 300 lb weight rating as opposed to 1,000 + lbs like we see with some of the sliding cargo trays that bolt to the truck bed. The installation…

view full answer...

Answer 3

The Custom Third Brake Light Camera for Aftermarket Monitor #3460007 you referenced has a power and ground wire setup (black and red bonded wire with black connectors) and has a video signal circuit that is carried on the yellow RCA cable. For more…

view full answer...

Answer 4

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

Yes, it will! The B&W Continuum Weight Distribution Head Assembly item #BW48FR will work perfectly with the B&W Continuum Weight Distribution System item #BW28FR.

view full answer...

Answer 8

Hello Steve. I do have a good solution for you, but I cannot recommend using the Malone Adapter #MPG544. Since it is rated for towing only 4,000 lbs, your 8,000 lb towed vehicle would be double the max towing capacity. You are right about there being…

view full answer...

Answer 9

For suspension enhancement on your 2022 Ford F-150, I recommend the RoadActive Suspension Custom Leaf Spring Enhancement Kit - Heavy Duty #RAS3611-YHD. The RoadActive leaf spring enhancement is a better choice than air bags because the leaf spring…

view full answer...

Answer 10

For a hard folding tonneau cover that is rack compatible on your 2023 Ford F-150 I recommend the BAKFlip MX4 Hard Tonneau Cover. You will need one of the following based on your bed length: -BAKFlip MX4 #BAK76FR (5-1/2' bed) -BAKFlip MX4 #BAK46FR…

view full answer...

Answer 11

Yes, we do indeed have the Lippert hydraulic pump part 359167; the exact part you are looking for is the following: - Lippert RV Level-Hydraulic Pump Assembly - Vertical - 1.5 Gallons - No Float #LC66FR

view full answer...

Answer 12

Yes, the etrailer Invisible Base Plate Kit #e86YR will fit your 2022 Ford F-150 Powerboost Hybrid. For a complete flat towing setup you will need a base plate kit, tow bar, safety cables, vehicle tow bar wiring, a supplemental braking system, and…

view full answer...

Will The Truck Trolley Sliding Truck Bed Tray # TR87VR Allow for Generator To Slide In & Out of Bed?

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching