Review of etrailer by AxleTek Trailer Axles - 3.5 K Idler Axle with Easy Grease Spindles - e52GR Video

In regards to trailer suspension kits like the Suspension Kit for Tandem-Axle Trailers part #AP233, the shackle bolt heads are indeed seating into the hangers via the knurling on the bolt. If you hold a wrench on the bolt head and tighten the nut,…

The etrailer 3,500lb Trailer Axle #e52GR you were looking at is made for us by Axletek.

Trailer wheel bearings are specific to the spindle that is installed on the axle that is on your trailer. You will need to safely support the trailer, remove the wheel and tire, remove the grease cap, remove the cotter pin and washer that secures…

We don't have an install video on this exact axle, the Trailer Axle w/ Electric Brakes - 4" Drop - 5 on 4-1/2 Bolt Pattern - 95" Long - 3,500 lbs part #e45SR, but I did do one on a similar style which I have attached for you…

I have exactly what you need for a replacement trailer axle with 95" hub face to hub face and 80" spring center to spring center measurement. For this we have the following options based on weight capacity. 3,500 Lbs: part #7359765…

The spring seat dimension will depend on the width of the trailer frame that the leaf springs would mount to. So typically from center of frame channel to center of the other side is the leaf spring seat to seat dimension you'd need for the axle.…

To determine the size of the hub assembly you need to purchase you have to determine which bearings are in the old assembly. If the old assembly has L44649 inner bearings, you would use the hub you chose #8-258-5UC1. If the inner bearings are marked…

Yes, you can weld on new spring seats for a 95 inch trailer axle since there are none with the measurements you need. For the Dexter Trailer Axle with Idler Hubs #7359765-I you can use the Spring Seat #TRSS238. I have added links to video reviews for…

The spring seats on trailer axles like the #e52GR that you referenced are welded on so you'd have to cut them off and have them rewelded if you needed to move them.

The term, wet, in this case means that the head of the bolt has a grease Zerk in it and there is a channel that leads to center of the bolt. This makes it easy to grease the bolt while installed, as you can put a grease gun right up to the Zerk and…

In order to recommend an upgraded suspension for your RV, I'll need to know the capacity of your existing axles and the height and width of your current equalizers. Unlike passenger vehicles, RV's don't have online resources that would…

Since your shackle straps are 2-1/4 inch for a wet bolt and heavy duty shackle kit you'd want the #MR46ZR which comes with bushings as well. You do not need new equalizers.