etrailer A-Frame Trailer Coupler CA-5100-RK Review Video

Though we do not carry coupler kits that are designed with your specific car hauler in mind, we do have the Repair Kit for etrailer and Ram A-Frame Couplers, part #CA-5100-RK, that you referenced. As the name states, this is designed with etrailer…

If the trigger broke on your Pro Series A-Frame Trailer Coupler #PSE338050303 then you would need to replace the whole unit. I reached out to my contact at Pro Series who said that they unfortunately do not have carry any replacement parts for this…

Coupler Repair Kit #CA-5100-RK includes all parts needed to rebuild an etrailer brand or Ram brand 5K-rated 2-inch ball coupler with a trigger latch. It consists of all components other than the housing. If you have one of these models - #CA5100B,…

The model 1980 Bearing Buddy simply means that they fit a 1.980 inch hub bore. There is one difference of note between Bearing Buddy Bearing Protectors #BB1980A (Chrome Plated) or #BB1980A-SS (Stainless Steel) and the Bearing Buddy Bearing Protectors…

In order to pick out the correct bearing buddy you will need know the pilot hole of your hub. To do this, remove the wheel and tire and remove the grease cap from the center of the hub. Usually it is a metal cap that is just lightly hammered into…

We have a nice selection of repair kits available for A-frame trailer couplers. The kit you need will depend on what type of coupler you have and its manufacturer. For example, the etrailer Repair Kit #CA-5100-RK that you were looking at is designed…

The manufacturer's name should be stamped somewhere on the coupler itself. The information is usually located on the top of the coupler, to the rear of the latch. The capacity of the coupler and the size ball the coupler is intended to be used…

We likely have an option for you to replace your trailer's tack room lock, but there are no specific replacement parts for your trailer, and we don't have a way of looking anything up, so the best we can do is offer you a way to choose your…

The Repair Kit for etrailer and Ram A-Frame Couplers #CA-5100-RK only fits the following couplers #CA5100B, CA-5100-BLB, and #CA-5100-Z, so it would not solve your connection difficulty, unless you had one of these specific couplers. Aside from…

Thank you for providing a photo of your trailer coupler. Trailers should always be level when hitched. If a trailer is out of level when towed it will tend to have more sway. I notice you have weight distribution (WD) lift brackets on your trailer…

Based on my research the Shelby 5101 is an A-frame coupler with a 2" ball and 5,000 lb capacity. We have exactly that with the A-Frame Coupler #CA5100B, which has a trigger latch and has a black paint finish. The same coupler is available with a…

When you mention locking collar, I am led to believe that you might be describing a hammer blow-type coupler, like our part #BD028288. This type of coupler has a collar that would slide up, securing the jaws of the coupler in place over the trailer…