Review of Westin Replacement Step Pad - 26-0001 Video

The #25-0001 replacement pads are too short for your bars. The bars on your 2009 Hummer H3 are part #23-2865. So what you need instead is part #23-0001 for the correct step pad. It's 21 x 3 inches and has 5 posts. The 5 barrel clips are included…

We do have a 21x3 inch replacement pad. It is the Replacement Step Pad for Westin E-Series Nerf Bars - 21" Long x 3" Wide - Qty 1, #23-0001. Unfortunately this pad has 5 posts. The closest 4 post replacement pad we have is the Replacement…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

The Replacement Step Pad for Aries 3" Wide Oval Nerf Bars #AA86FR measures 6.496” apart center-to-center for the inner pins, and the two outer pins measuring 17.795” apart center-to-center. It's not uncommon for replacement pads to fit from…

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

We have run into this quite a few times in the past, and the best option will be replacing the Lance 7-pin connector with a standard 7-way blade connector like the #PK12706. This will give you a standard 7-way connector to plug into the factory 7-way…

I spoke with Aries and they told me that the Replacement Step Pad for Aries 3" Wide Oval Nerf Bars #AA86FR measures 19.736”, is 3.125“ wide, the two inner pins are 6.496” apart center-to-center, and the two outer pins are 17.795” apart…

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

I did some checking and basically the cutout bumper is the regular factory bumper. The Curt hitch, #C15312, will fit up tighter and a little more recessed, apparently the same way the factory hitch does if it were installed. Some people like the…