Review of Westin Replacement Mounting Hardware Kit For HDX Winch Mount Grille Guard - 57-9378PK Video

The Replacement Mounting Hardware #W78XV you found is for the Grille Guard #57-3955 which fits a Silverado 1500. For your 2016 Ford F-150 we have the Replacement Mounting Hardware #W84HR which fits the similar Westin HDX Grille Guard with Punch Plate…

You have it right so far, the 4-way connector is just as you have stated. Remember that Yellow has a L in it so that is the left side brake/turn signal and green has a R in it so that is the right side brake/turn signal. The colors for wiring a 7-way…

Typically in order to add a winch to the front bumper/grill guard there needs to be a large, flat platform or some sort of casing built into/attached to the tubing to house the winch; the Westin HDX #57-3875 does not have this. I spoke with Westin…

For Westin HDX Grille Guard with Punch Plate #57-92375 for your 2013 Ford F-350 you will need Replacement Mounting Hardware Kit #57-237PK which includes the brackets and hardware to attach to the vehicle.

I agree it is the right time to upgrade to a Lithium charger/converter as not all are Lithium compatible. I recommend using the Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger - 60 Amp #PD4060K which is a replacement for your…

The part you referenced 127194TB is a double-lip seal with an inner diameter of 1.274-inches and an outer diameter of 1.983-inches. The available seal nearest to those dimensions that we offer is part #RG06-010, which is a double-lip seal sold as a…

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

The correct replacement for a Demco Master Cylinder 05680-C is the Replacement Master Cylinder part #5650. I spoke with Demco to confirm this for you.

The correct replacement master cylinder kit we have for your Demco setup is the part #DM5918 which comes with the lock out replacement.

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

Seal 171255UC has an inner diameter of 1.719 inches and outer diameter of 2.565 inches. A seal that has those dimensions would actually be #58846. I've added a link to a video review of this seal for you to take a look at.

The AL-KO trailer hub part number 8700 that you have is a 3,500 lb trailer hub/drum with a 5 on 4-1/2 inch bolt pattern. Based on that the #AKHD-545-35-EZ-K is the correct fit and would work great.