Replacement Mounting Brackets and Hardware for Westin HDX Winchmount Grille Guard 57-92375

Question

Question:

I am looking for the mounting brackets for this bumper . Fits 2013 Ford F350 can you assist please

asked by: Larry H

0

Expert Reply:

For Westin HDX Grille Guard with Punch Plate # 57-92375 for your 2013 Ford F-350 you will need Replacement Mounting Hardware Kit # 57-237PK which includes the brackets and hardware to attach to the vehicle.

expert reply by: Michael H

0

Answer 1

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6-1/2 inch whereas the 225/75-15 fits widths that are 5 inch to 6 inch. The 205 is 27.1 inches tall and the 225 is…

view full answer...

Answer 2

If your old axles have a 5 bolt brake flange the assemblies like Dexter Electric Trailer Brake Assembly - 12" - Left Hand - 6,000 lbs part #23-105 or Dexter Electric Trailer Brake Assembly - 12" - Right Hand - 6,000 lbs part #23-106…

view full answer...

Answer 3

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on…

view full answer...

Answer 4

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion…

view full answer...

Answer 5

While we may have an option for you, we do not have the exact specs on your Allis grease seal part number 5013 29772. However, with the 1.6" ID and 2.5" OD measurements you provides, that is very close to our #58846. This particular…

view full answer...

Answer 6

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two…

view full answer...

Answer 7

I do have an option for you, however, the Westin HDX Grille Guard with Punch Plate #57-2365 is not a fit for your truck. The compatible Westin HDX Grille Guard for your 2012 Ford F-350 is item #57-92375. For your year truck, there is a winch mount…

view full answer...

Answer 8

The replacement mounting hardware for the Westin HDX Grille Guard with Punch Plate #57-3835 that fits your 2020 Ford F-150 is part #57-383PK. Please note that grille guards and their hardware kits are vehicle specific fits.

view full answer...

Answer 9

The Westin HDX Grille Guard you have now part #57-3835 fits the 2015 through 2020 F-150's so it should fit as-is and not require any different mounting hardware. Going with the new hardware #57-378PK won't give you anything differently from…

view full answer...

Answer 10

The Phoenix Faucets #PF231561 has the following measurements: Spout 15 inches Distance inside of spout 6-3/4 inches Base to top of spout 9-1/4 inches Nozzle to top of spout 4 inches Handle 8 inches Mount Flange 10 inches Nozzle 3 inches Shank 2-1/2…

view full answer...

Answer 11

We have the correct option for you but the Replacement Hardware Kit for Westin HDX Grille Guard #57-3900PK is not confirmed to fit your 2010 Ford F-250 Super Duty. You will need the Replacement Installation Hardware Kit for Westin HDX Grille Guard…

view full answer...

Answer 12

We don't have just the hardware of the Westin MAX Winch Mounting Tray #46-23735 that you referenced but I attached a picture that I took from the install instructions that shows all of the bolt and nut sizes you'd need. You'd be able to…

view full answer...

Replacement Mounting Brackets and Hardware for Westin HDX Winchmount Grille Guard 57-92375

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching