Ventline RV Vents and Fans VA0445-25 Review Video

We sure can, but the Master Lock #605DAT lock you'd looked at isn't available keyed alike. We do have options for keyed alike coupler locks, however. I'd recommend a latch lock such as the etrailer brand #e98890 for a 7/8 inch span or…

The correct replacement cover for your Ventline Northern Breeze VB0568 Roof Vent is the Vent Cover for Ventline Old Style Rounded Dome Trailer Roof Vents #BV0554-01 for white, or #BV0554-03 for smoke. I have attached a couple of videos for you to…

The industry standard size for a roof vent is 14" wide x 14" long. This roof vent you have now appears to match the industry standard and since you have a continuous hinge, I recommend using the Vent Cover for Ventline Old Style Rounded…

The replacement roof vent covers are all pretty much the same size, 14-1/4" x 14-1/4" which makes things a bit easier but they do not all use the same hinge. Therefore, in order to determine the correct replacement roof vent cover for your…

Thank you for the picture of your roof vent! From that I can tell the correct replacement is the part #BV0554-01 as you have the old style of dome vent from Ventline. I attached an install video for this for you to check out as well.

The standard square trailer roof vent size for the majority of trailers is the 14 x 14-inch size. And we do offer replacement lids, protective covers and also complete new vent assemblies. If you need just a new vent lid you can refer to the linked…

The replacement trailer roof vent cover you will need is one that measures the 14-1/4 x 14-1/4 inches. If your old vent lid was the rounded dome style like the Ventline #BV0554-03 lid you were looking at what you will want to check is that cover uses…

The direct replacement for your Ventline screen with model number VD0434 is #BVD0434-31 (birch white) or #BVD0434-41 (polar white). This is compatible with Ventline Ventadome roof vent models V2092, V2110, V2094 and V2119. However, if you're…

I attached a picture that a coworker of mine took that shows the dimension you are looking for on the part #BVC0573-31. Looks to be right at 2-3/4 inches.

The Replacement Screen Frame with Screen #BVC0573-31 has a knockout which you can see in the upper left corner in the image below. If you would like to replace the switch to be safe it is also available with the switch #BVC0573-31R.

Yes, the replacement base part #315-DTY is available for the Rectangular Boat Table #315-DSH-KS that you referenced.

I went out to the warehouse to take some measurements of the Fan-Tastic Vent Ultra Breeze Trailer Roof Vent Cover #FVU1500WH for you, specifically the bottom which touches the surface of the trailer. It juts out a bit, and measures roughly 20"…