Replacement Screen for Ventline Ventadome Trailer Roof Vents Model VD0434

Question

Question:

The screen falls out because the plastic tabs are broken. Inside dimension of screen is 11 1/4”. The outside dimension of the frame is 12 5/8”. Pics attached. What should we order? Thanks.

asked by: Jill

0

Expert Reply:

The direct replacement for your Ventline screen with model number VD0434 is # BVD0434-31 (birch white) or # BVD0434-41 (polar white). This is compatible with Ventline Ventadome roof vent models V2092, V2110, V2094 and V2119.

However, if you're referring to the plastic tabs pointed in the photo I attached, then what you need to replace is the complete frame assembly with part # BVC0573-31 for birch white, or # BVC0573-41 for polar white. This includes a new screen as well. The standard size on the plastic frames on all the above mentioned Ventadome roof vent models is 13-1/2 inches outside with the screen measuring 11-1/8 inches. So, assuming you meant to type 13-5/8 inches instead, this will work perfectly.

The # BVC0573-41R you were looking at includes a rocker switch for powered lift vents, which you don't need since it looks like yours is manual.

expert reply by: Carla M

0

click to enlarge

Answer 1

No the MAXX AIR II Vent Cover #MA86JR that you referenced does not come with a bug screen built into it. Just the screen is not available as it does not separate.

view full answer...

Answer 2

The difference between the two screens is that the part #BVC0573-31 does not have a switch built into the screen whereas the #BVC0573-31R does. Does your Ventline vent have a switch built into the screen? If so, you would need the #BVC0573-31R.…

view full answer...

Answer 3

The Replacement Screen Frame #BVC0573-41R is designed to fit Vents like the part #V2094SP-28 with are 14 inches by 14 inches. So the #BVC0573-41R would be right at 14 inches by 14 inches.

view full answer...

Answer 4

While we do not have the ability to pull an OEM build sheet to know what part number was factory installed, we do have a great selection of marine speakers regularly used on RV's for outside mounting. For a 6" diameter replacement…

view full answer...

Answer 5

We have a couple of options to replace your Atwood 36636, and you can use either. One is from Atwood and the other from RV Safe: - Atwood RV Carbon Monoxide and Propane Gas Detector #AT36681 - RV Propane Gas and Carbon Monoxide Detector - Black…

view full answer...

Answer 6

We do have the following screens and sleeves for your Ventline V2094 roof vent on your 2013 Jayco Featherlite Hybrid X23B. I have included some parts as an assembly and some other parts based on on exactly what all you want to replace with your…

view full answer...

Answer 7

I do have a replacement screen available for the Ventline Ventadome VD0433 Trailer Roof Vent that you have on your trailer but they do not make a non-removable version that will work for you. Instead, I recommend replacing the screen with part…

view full answer...

Answer 8

The Replacement Screen Frame with Screen, Rocker Switch, and Wire for Ventline Roof Vents #BVC0573-41R is going to already have a switch installed so you could just hang onto the switch you have or pop out the included one for the switch that you…

view full answer...

Answer 9

The correct replacement for your VDO 433 / VDO 434 is going to be the: -Replacement Screen Frame with Screen for Ventline Ventadome Manual Lift Roof Vents #BVC0573-31. This part includes the replacement screen with the screen frame, however if you…

view full answer...

Answer 10

Thanks for the picture of the roof vent you have. Based on that the replacement screen you need is the part #BVC0573-31 that you referenced.

view full answer...

Answer 11

The Jensen RV Stereo part #JWM60A would be an excellent replacement option for the Jensen RV Stereo part AWM910. The cutout size needed as well as the mounting hole locations are virtually identical between the two units so this part of the process…

view full answer...

Answer 12

We have just what you need. The very best trailer tire option we have is from Lionshead and is part #LHWL304. This is a higher Load Range than yours as you have a Load Range D currently and this is a Load Range of E with capacities of 2,830-lb max…

view full answer...

Replacement Screen for Ventline Ventadome Trailer Roof Vents Model VD0434

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching