Review of TecNiq Boat Lights - Surface Mount 360 Degree LED Boat Navigation Light - TN65ZR Video

I have attached a chart you can check out that describes the torque needed per wheel size, wheel stud size and material. For an 8-inch wheel with a 1/2-inch wheel stud the torque is 75 to 86 ft-lbs. For a 15 inch steel wheel with 1/2 inch wheel…

It sounds like your trailer had a wishbone harness and/or could have multiple ground wires. On a 4-Way trailer end, the one covered pin is the ground. Next to that is the running light pin. The running light pin on some connectors will have more…

For a 40 foot long section of 4-way wiring that includes the connector we have the part #A40W42B. I attached a review video for this for you to check out as well.

It sounds like you have something like the Amber Lens #MCL0032ABB at the front and the Red Lens #MCL0032RBB at the back of your fenders. Normally these lights are designed to switch on and off with your headlights since they are for clearance…

The modern size that replaces the old 20.5x8-10 would be ST205/60-10. I have included a link to all of the tires, and tire and wheel combos, we carry in this size. Tire #AM1HP56 that you have referenced is this new size and it is rated for 1,650…

In order to pick out the correct hub assembly for a trailer you are going to need to know a few key pieces of information. The first thing you will need to know is the bolt pattern of your hubs. This is so you get a hub that is compatible with your…

I spoke with my contact at TorkLift regarding the Custom Frame-Mounted Camper Tie-Downs for your 2018 Ford F-450. He stated that while they have not been able to physically test the fit on your 2018 model F-450, it is very likely that the #TLF2021…

The torque specifications for the Kenda 4.80-12 Bias Trailer Tire with 12" Galvanized Wheel part #AM30670 will be between 75-85 ft. lbs. If you need a torque wrench, we have plenty to choose from such as the 1/2" Drive Torque Wrench part…

I have attached a chart for you to take a look at that includes the lug nut torque specifications. If your wheel uses 1/2 inch lug nuts or wheel bolts like the 12 Inch Steel Spoke Trailer Wheel #AM20124 referenced in your question, you will torque…

You should be fine as most people do not have trailer wheels and tires balanced, but if you are having a shop mount the tires, and you want to have them balanced, it probably would not cost much more to have the setup balanced as well. One reason…