Review of Taylor Made Boat Fender Attachment Bracket - 3691010 Video

Yes. You can mount the Taylor Made Low-Profile Boat Fender Mounting Bracket #3691010 on the aluminum rail of a pontoon boat. You would need to drill a small pilot hole in the rails and then use a slightly larger self tapping screw to install this…

The main differences between the two trailer tire sizes you referenced are the outer diameter for the two and the capacities available. For the 4.80-12 tires they are 20.5 inches in overall diameter and have 785 and 990 lb capacities available. For…

The tire size of 4.80-12 like what comes on the part #AM30630 is right at 3 inches narrower overall than the tire size of 185/80-13 so you would gain over an inch of inner sidewall room like you are needing.

Switching from a 4.80-12 size tire to an ST175/80R13 is quite a decent jump in size but it really just depends on how much room you currently have available both between the top of the tires and fender and between the side of the tire and trailer…

When you say Kenda Loadstar K353 12", I believe you are referring to the Kenda K353 Bias Trailer Tire - 4.80-12 part #AM10062 or Kenda K353 Bias Trailer Tire - 5.30-12 part #AM10066. Both of these Kenda K353 Bias trailer tires are rated for 65…

If you find yourself in an emergency situation, you could temporarily use a lower rated tire as a spare until you can get the damaged tire repaired or replaced, but generally speaking you wouldn't want to mix tires with different load ratings…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

Load range B trailer tires are going to have a lower capacity than C load range tires. Basically that, psi rating, and the ply rating are the only differences. A higher load range tire would last a little longer than lower load ranges of the same…

Your math is correct in your trailer weight load example. If a fully-loaded tandem axle trailer weighs 4000-lbs then each of the 4 tires will bear 1/4th of that load, or 1000-lbs. In this case a tire rated for 1300-lbs would provide a good safety…

The three most common lug stud sizes for a trailer are 1/2"-20, 9/16"-18, and 5/8"-18. In order to make sure you get the correct lug nuts you need to measure the lug studs on the trailer now as we have no way to look this up for…

You can add larger wheels and tires to a trailer as long as you have enough room for the larger size. The main clearance issues we find when putting larger tires and wheels on a trailer is from the top of the tire to the fender and from the inside…