Superchips Performance Chip - Programmer - SU1545 Review Video

The Draw Tite hitch part #DT45517 that you referenced has a mounting bracket designed for attaching a trailer wiring bracket like the part #18144 to. You would simply need to attach the bracket to the hitch and it would easily store a 4-way.

Timbren Rear Suspension Enhancement Systems such as #TFR1525HD that you referenced will provide you a smooth ride when your truck is loaded - until the bed of your truck has sufficient load to take up the 1/2 - 1 inch of spacing between the Timbren…

If your plan was to install a set of SumoSprings part #SSR-201-47-2 on your 2001 GMC Sierra you'd need to remove the Firestone kit you have installed already since they install on the same part of the truck frame.

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the…

I reached out to my contact at Superchips and he said you can absolutely use the performance tune for everyday driving with your tuner like the Flashpaq #SU1845 you were looking at. This won't have any negative effects on the engine. This…

The various tune modes of the Flashpaq programmer #SU1845 for your 2001 Ford F-250 with V10 motor have different fuel requirements. For light tow mode you would use the octane fuel specified by Ford for your truck. For heavy towing mode you would…

I spoke with my contact at Superchips and he told me that for your 2003 Ford F-150 with 5.4L Triton V8 Engine you can expect an additional 20 horsepower and 28 ft-lbs of torque with the Superchips Flashpaq Performance Tuner, #SU1845. For the…

I did some checking and your 1999 ford f150 5.4l has oil filter threads that are M22x1.5 which means that for a cooler kit you'd want the #D15405 which includes a fitting that matches this size. The cooler that comes with this is a plate-fin…

When installing the Flex-a-lite Direct Fit Dual Electric Radiator Fan #FLX270 on your 2000 Ford F-150 with the 5.4L engine you should not need to upgrade the alternator. This unit features a power draw of just 28 amps so your stock alternator will be…

I cannot speak as to the requirements you will need to keep your 4.6L V8 engine cool after removing the mechanical fan but I can say that mechanical fans draw much more CFM than your average electric fan. The typical mechanical fan can draw anywhere…

You are correct, the Derale Engine Oil Cooler Kit part #D15551 that you referenced does come with the correct M22x1.5 thread size that your 1999 Ford F-150 with a 5.4 liter engine comes with so it would work great for you.

You need an engine cooler kit with a spin-on adapter, #D15551. This kit also has the multiple threads and O-ring options. I have included a link to a video showing a typical isntallation and a link to the installation instructions for you.