Draw-Tite Front Mount Trailer Hitch Installation - 2016 Ford F-350 Super Duty Video

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

No, I can't recommend you use a bike rack cover like the #S24FR on a bike rack that is installed on a front hitch. You really can only use covers like this behind a very large vehicle where the air flow is basically blocked. Reason is the…

The primary advantage of frame-mounted camper tie-downs like the TorkLift #TLF2012A and #TLF3001A, which are designed to fit your Ford F-350 if it has the 6-3/4 foot bed without a step/board underneath and a factory hitch, is the stability they…

I do have an option for you but the only snowplow mount options for a 2022 Ram 1500 are hitch mounted therefore you will need a front mount trailer hitch, the Curt Front Mount Trailer Hitch Receiver part #C87FR is what I recommend. If you have a two…

Your 2011 Ford F-350 with a GVWR of 10,800lbs is the maximum amount the vehicle can weigh fully loaded. Depending on your configuration your curb weight is likely between 6,000-7,500lbs. Since you plan on using for a winch and mud will be involved I…

For your 2008 Ford F-350 we have the Draw Tite hitch part #65049 which is a confirmed fit and has a tongue weight capacity of 500 lbs. The motorcycle carrier we offer that would work best is the Ultra Fab part #UF48-979033. Reason being it weighs…

To install the Draw-Tite #65049 on your 2012 F350, the front air dam under the bumper does indeed need to be removed temporarily. Once the hitch is in place, a hole is cut in the air dam that allows the receiver opening to pass through, then the air…

To avoid towing something you could use a motorcycle carrier like the Ultra-Fab Carrier #UF48-979033. This carrier can be used as long as your motorcycle does not weigh over 500 pounds and your vehicle and hitch have a tongue weight capacity of 500…

The Draw-Tite Front Mount Trailer Hitch Receiver, #65049, will fit the 2011 Ford F-250 Super Duty Lariat. I have included links to the installation details and a video showing a typical installation for reference. A cooler would have to be pretty…

The highest capacity front hitch we offer for your 2015 Ford F-350 is the part #65049 that has a vertical pull rating of 500 lbs. The best solution I could provide for you would be the motorcycle carrier part #UF48-979033 that has a 600 lb capacity…

I reached out to my contact at Superchips and he said you can absolutely use the performance tune for everyday driving with your tuner like the Flashpaq #SU1845 you were looking at. This won't have any negative effects on the engine. This…

When installed, the EcoHitch #EH59FR front receiver will sit in the middle of the front bumper, between the tow hooks as shown in the photo I've provided for you. With the receiver sitting in the middle of the bumper, you won't need to worry…