Review of Roadmaster Replacement Polyurethane Bushing For Roadmaster Kit RM-4109-109 - RM-205221-10 Video

The diameter for the Roadmaster Sway Bar part #RM-1109-116 is 1-5/8 inches like the instructions list.

In order to add an anti-sway bar to the front of your 1995 Chevrolet P30 chassis, you will want to use the Roadmaster Anti-Sway Bar and Bushing Kit for Motor Homes part #RM-1109-116. The anti-sway bar will help with side to side movement, driver…

The steering stabilizer that you need for your 1995 Georgie Boy Cruisemaster on a Chevrolet P30 Chassis is the Roadmaster part #RM-RBK3-RSSP30. We don't necessarily have replacement OEM rear sway bar bushing, but we do have the Roadmaster…

Based on my research your 1996 Tiffin Allegro Bay 32 was built on the P30 Chassis. The Roadmaster Reflex Steering Stabilizer with Mounting Brackets for Motor Homes #RM-RBK3-RSSP30 is the correct fit for that chassis.

Yes, the bushing brackets are included with the Roadmaster Front Anti-Sway Bar and Bushing Kit #RM-1109-116. I have included a picture that outlines what parts are included for you to check out.

I will start off by saying that the Replacement Bushing #RM-205381-00 is the direct replacement for the Roadmaster Polyurethane Bushing Kit for 1-3/8" Diameter, Factory Rear Anti-Sway #RM-4139-300. To further that, the Replacement Polyurethane…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

The Hellwig Adjustable Big Wig Rear Anti-Sway Bar #HE94FR is only going to leave a few inches between it and the spare tire, as you can see in the attached picture. Depending on how far forward you have the tire it could potentially interfere with…

You are correct that this refrigerator does not have an ON/OFF switch or function. The best you can do is "Standby" that draws an unknown amount of power. One option is to pull the 12-Volt fuse at the RV power center. A much better option…