Reese Gooseneck RP30138 Review Video

We do have the brackets for the #RP87FR which are the Inner Frame Brackets #RP27FR. The puck plugs are #58199 and then for the gooseneck hole cover #RP30136. The missing hardware is not something that we have right now since Reese has had issues with…

The distance between the pucks on the Reese Adapter for Ram #RP30154 is 39-1/8 by 30-1/2 inches. I had to contact Curt for their Adapter Rails for Curt Fifth Wheel Sliding Hitches #C16023 that fits the GM, and according to them the pucks measure…

From left to right the pucks of the #RP30868 measures 30 inches and then from front to back they measure 13 inches.

Yes, you could weld the Reese Elite Series 5th Wheel Rail Puck Adapters part #RP30149 directly to your flatbed. However, there would be no real way to then formulate any sort of weight capacity for the system once done so. The pucks really need to be…

The factory prep package or pucks are not the same between Ram, GM and Ford. The spacing is all different which means you cannot use a 5th wheel hitch for Ram pucks on a GM with pucks. Take the Curt A25 5th Wheel Trailer Hitch for example which is…

Yes, the Adapter Rail for Curt 5th Wheel Hitch's part #C88KR which is a fit for a 2021 Chevrolet Silverado 3500 will work with a Reese 16K 5th Wheel Hitch. They are simply above bed rails so they will work with Curt, Reese, Husky etc. hitches.

A goose neck hitch ball, or the center of a 5th wheel hitch head for that matter, will be located either right over the rear axle or an inch or so forward of it. You do not want a goose neck hitch ball to be located behind the rear axle since this…

I have a solution for you but they do not offer an offset gooseneck ball that will drop into the center hole on a factory in bed hitch. This is due to the locking system on all the in bed hitches not being strong enough to prevent the offset ball…

The Reese Under-Bed Rail and Installation Kit for Reese Elite Series 5th Wheel Trailer Hitches #RP30061 can be used with a Curt legs #C16017 and a Curt hitch like #C16520. The max capacity will be limited by the hitch head or the Elite rails which…

I went out into our warehouse and measured the overall height of the Replacement Quick Turn Puck #116517 and found it to be 2-1/8 inches.

As long as you have a Reese Elite Gooseneck Hitch in the bed of your 2013 Ford F350 then the Reese Elite Series Pop-In Ball Kit #RP30137 would work for you. Or if you have the Ford Hitch Prep package with the gooseneck hitch built into then all you…

For your 2018 GMC 2500HD without factory prep puck system, I recommend adding one using the Reese Elite Series Under-Bed Gooseneck Complete Hitch #RP30158-68. This will give you pucks that look and function just like the factory yet the 5th wheel…